What are the functional applications of the muffle furnace

Muffle furnace is a commonly used heating equipment in laboratory heat treatment workshops. Its furnace temperature is generally measured by a thermocouple and displayed on the temperature control meter. The temperature measurement ring can also be used to measure the temperature of the muffle furnace. During the measurement, put the temperature measuring ring in the corundum sagger and put the lid into the furnace, and then start to raise the temperature. After reaching the set value, keep it warm for 1 hour and then cool the electric furnace. After the furnace cools down, open the lid of the sagger and take out the temperature measuring ring.

Use a micrometer to measure the diameter of the temperature measuring ring several times, take the average value, and read the temperature against the comparison table of the temperature measuring ring. Then record it. It is more accurate to measure the temperature with the temperature measuring ring. It is often used for the temperature calibration of the muffle furnace and also used for the temperature field measurement.

The components in the atmosphere of the muffle furnace are selected to absorb infrared rays of different wavelengths, and the absorbed infrared energy varies with the content of the components in the atmosphere. With a dew point meter, since the dew point means that the water vapor in the atmosphere begins to freeze or atomize, the higher the water vapor content, the higher the atmospheric dew point. Measure the dew point in the atmosphere to determine the moisture content.

The high-temperature muffle furnace produced by Luoyang Songdao Induction Heating Technology Co., Ltd. is equipped with a high-performance circuit breaker, which will automatically trip and cut off in the event of a short circuit or excessive current. In addition, our company also provides customers with additional extended functions, such as opening the door and powering off, etc. Customers can choose whether to install them according to the process requirements. After all, the safety of a qualified furnace is important.