Operation mode of blus toerusting for machine tool rails

The machine tool guide rail quenching equipment adopts the continuous quenching method. The commonly used machine tool structure can be divided into two types of structure: machine bed movement or sensor movement. Need to move, when the transformer/inductor is used to move, the quenching bed does not need to be moved, the parts are fixed and installed, and the area is small. The cable and cooling waterway need to be moved with the transformer. Due to the integrated design structure of the transformer and the capacitor bank, the cable moves Will not increase power output loss.

When we use the inductor moving structure for quenching, the bed of the machine tool is fixed, and the inductor moves along the quenching direction of the guide rail to perform continuous quenching. Considering the quenching of the two sides of the guide rail and the advance and retreat movement of the inductor, the quenching transformer should have With the functions of lateral movement and up and down movement, when one rail is quenched, the inductor automatically moves to the other rail for continuous induction hardening, thereby completing the entire quenching process.

Operation of ultra-audio frequency quenching equipment for machine tool (bed) guide rails:

1. Plaas eers al die knoppies op die bedieningspaneel in die aan-posisie.

2. Die kragverstellingsknop kan eers na die middelposisie verstel word.

3. Die toerusting word aan die een kant van die werkstuk (bed) aangepas, en die induktor is in lyn met die blusoppervlak. As die sensor water na links spuit, beweeg die sensor na die linkerkant van die werkstuk, en die toerusting beweeg na regs vir blus. As die spuitrigting van die sensor na regs is, sal die sensor na die regterkant van die werkstuk beweeg en van die regterkant na die linkerkant beweeg vir blus.

4. Die voorbereidings is voltooi, skakel die watersproeiskakelaar aan, en druk dan die verhittingsknoppie om te begin verhit. Druk dan die links vorentoe of regs terug knoppie om die toestel te skuif.

5. Let op die verhittingstemperatuur. Wanneer die temperatuur laag is, kan jy die kragknop stadig na ‘n geskikte temperatuur verstel.

6. Wanneer die blustemperatuur nie bereik kan word wanneer die krag tot die boonste limiet aangepas word nie, moet die lengtebewegingspoed toepaslik verminder word.

7. Skakel die krag af nadat blus voltooi is.