Yanayin aiki na kashe kayan aiki don mashin kayan aiki

Kayan aikin injin jagorar dogo kayan aikin kashewa yana ɗaukar hanyar ci gaba da kashewa. Za a iya raba tsarin kayan aikin injin da aka saba amfani da shi zuwa nau’ikan tsari biyu: motsin gado na inji ko motsi na firikwensin. Bukatar motsawa, lokacin da ake amfani da wutar lantarki / inductor don motsawa, gado na quenching baya buƙatar motsawa, an gyara sassan kuma an shigar da shi, kuma yanki yana da ƙananan. Kebul da hanyar ruwa mai sanyaya suna buƙatar motsawa tare da taswira. Saboda haɗaɗɗen tsarin ƙirar na’urar tawadar wuta da bankin capacitor, motsin kebul ba zai ƙara hasarar fitar da wuta ba.

Lokacin da muka yi amfani da tsarin motsi na inductor don kashewa, gadon kayan aikin injin yana gyarawa, kuma inductor yana motsawa tare da hanyar quenching na dogo jagora don ci gaba da kashewa. Idan aka yi la’akari da quenching na bangarorin biyu na layin dogo da ci gaba da ja da baya na inductor, injin mai kashe wuta ya kamata ya kasance tare da ayyukan motsi na gefe da motsi sama da ƙasa, lokacin da jirgin ƙasa ɗaya ya ƙare, inductor yana motsawa ta atomatik zuwa ga sauran layin dogo don ci gaba da taurarewar induction, ta haka ne ya kammala dukkan aikin kashewa.

Aiki na ultra-audio mitar kashe kayan aiki don kayan aikin injin (gado) jagorar dogo:

1. Da farko, sanya duk maɓallan a kan panel na aiki a cikin matsayi.

2. Za’a iya daidaita maɓallin daidaitawar wutar lantarki zuwa matsayi na tsakiya na farko.

3. Ana daidaita kayan aiki zuwa ƙarshen ƙarshen aikin (gado), kuma inductor yana daidaitawa tare da quenching surface. Idan firikwensin ya fesa ruwa zuwa hagu, firikwensin yana motsawa zuwa ƙarshen ƙarshen aikin, kuma kayan aiki suna motsawa zuwa dama don kashewa. Idan feshin shugabanci na firikwensin yana hannun dama, firikwensin zai matsa zuwa ƙarshen aikin dama kuma ya matsa daga ƙarshen dama zuwa ƙarshen hagu don quenching.

4. An kammala shirye-shiryen, kunna maɓallin feshin ruwa, sannan danna maɓallin dumama don fara dumama. Sannan danna maballin hagu na gaba ko dama don matsar da na’urar.

5. Kula da zafin jiki na dumama. Lokacin da zafin jiki ya yi ƙasa, zaku iya daidaita kullin wutar a hankali zuwa yanayin da ya dace.

6. Lokacin da zafin jiki ba zai iya isa ba lokacin da aka daidaita wutar lantarki zuwa babba, ya kamata a rage saurin motsi na tsayi daidai.

7. Kashe wuta bayan an gama quenching.