How to choose a reasonable combustion method for the muffle furnace?

1. Damit der Muffelofen den wirtschaftlichen Betriebsindex erreicht, muss das Problem der vollständigen Brennstoffverbrennung gelöst werden

2, the furnace temperature is high enough

Temperature is the primary condition for fuel combustion. The very low temperature required for the fuel to start a violent oxidation reaction is called the ignition temperature. The heat required to heat the fuel above the ignition temperature is called the heat source. The heat source for fuel to catch fire in the combustion chamber generally comes from

The heat radiation of flame and furnace wall and the contact with high temperature flue gas. The furnace temperature formed by the heat source must be kept above the ignition temperature of the fuel, that is, the furnace temperature must be high enough for the fuel to burn continuously, otherwise the fuel will be difficult to ignite, fail to burn, or even fail.

3, the right amount of air

The fuel must be fully contacted and mixed with enough air in the combustion process. When the furnace temperature is high enough, the combustion reaction speed is very fast, and the oxygen in the air will be quickly consumed. Sufficient air must be supplied. In actual operation, the air sent into the furnace is excessive, but the excess air cannot Too much, to be appropriate to avoid lowering the furnace temperature.

4. Enough combustion space

The combustible substances or fine coal dust volatilized from the fuel will burn as the flue gas flows. If the furnace space (volume) is too small, the flue gas flows too fast, and the flue gas stays in the furnace for too short time. Combustible materials and coal dust are fully burned. Especially when combustibles (combustible gas, oil droplets) hit the heating surface of the boiler before they are completely burned, the combustibles are cooled to below the ignition temperature and cannot burn completely, forming carbon nodules. At the same time, ensuring sufficient combustion space is conducive to the full contact and mixing of air and combustibles, so that combustibles can be fully burned.

5. Enough time

It takes time for the fuel to burn out without catching fire, especially for layer burners. It takes enough time for the fuel to burn. The larger the combustion particles, the longer the burning time. If the burning time is not enough, the fuel burns incompletely.