Compared with medium frequency quenching equipment, what are the advantages of machine tool guideway quenching equipment

In the quenching equipment, we often use high-frequency quenching and intermediate-frequency quenching, but because different workpieces have different requirements, sometimes these two quenching processes cannot meet the quenching of the workpiece. Therefore, in the application of quenching, the quenching equipment we will also use is the machine tool guideway quenching equipment. Regarding this equipment, its advantages make up for the deficiencies of medium frequency quenching equipment and high frequency quenching equipment, so let’s first understand the advantages and advantages of machine tool guideway quenching equipment.

Advantages of quenching equipment for machine tool guide rails:

1. The equipment belongs to the ultra-audio series products. The equipment structure is miniaturized and it is a high-power equipment, so there is a process required for this specific workpiece quenching.

2. Because the quenching layer of high frequency quenching we often use is too shallow, it is easy to crack at the sharp corners of the workpiece, and the quenching layer of intermediate frequency quenching is too deep and easy to deform, so the use of machine tool guideway quenching can achieve high Quenching quality and effect.

3. The quenching speed of the equipment is fast, and the double guide rails can be quenched at the same time. The quenching speed can reach 400mm/min.

Machine tool guideway quenching equipment is used in many cities in my country, and this equipment replaces intermediate frequency quenching equipment, because it has the following advantages compared with intermediate frequency quenching equipment:

1. The equipment is fast, small in size and easy to operate.

Second, the equipment saves nearly 1/3 of the electricity compared to intermediate frequency quenching.

3. As far as the quenching process is concerned, the hardened layer of the machine tool guideway quenching equipment can be controlled to a depth of 2-3mm, and the hardness is uniform, compared with the intermediate frequency, the deformation is small, and the amount of grinding can also be reduced.

The above content is to introduce some knowledge about the advantages of machine tool guideway quenching equipment. Through these, we have learned that machine tool quenching is more suitable for the quenching requirements of workpieces than high-frequency quenching and medium-frequency quenching. However, in some specific cases, these equipment still have certain advantages. It is a wise choice to choose different equipment according to different workpieces.