50KG matsakaicin mita na jan ƙarfe mai narkewa

Na farko, ƙayyadaddun fasaha da buƙatu:

1), narkar da kayan: goge kayan jan ƙarfe, ƙasa da kilogram 50 a lokaci guda.

2), narkewa: narkewar zafin jiki na digiri 1300, lokacin narkewa minti 30 na tanderu.

3), 坩 埚: silicon carbide Crucible (m babban bango kauri 150mm babba baki m diamita 100mm) rayuwa sabis 70-80 sau.

Na biyu, mafita na fasaha da zaɓin kayan aiki

Dangane da buƙatun fasaha na mai siye, ana iya zaɓar madaidaicin madaidaicin shigar da wutar TXZ-45KW. Tsarin shine kamar haka:

Ana sanya kayan ƙarfe da hannu a cikin tukunyar murhu.

Bayan an narkar da ƙarfe cikin ruwa, ana sarrafa wutar makera ta wutar lantarki kuma ana zuba ruwan a cikin injin.

Na uku, 50KG matsakaicin mita na jan ƙarfe na narkar da TXZ-45kw zance: ¥ 45000 yuan (ban da kewaya tsarin sanyaya)

1, 50KG matsakaicin mita na jan ƙarfe mai narkar da jan ƙarfe (gami da wutar lantarki + akwati mai ƙarfi + jan ƙarfe 200 kg wutar murkushe wutar lantarki)

Na huɗu, bayanin bayanin hoto: IF ƙarfin wutan lantarki + capacitor diyya + tanderun wutan lantarki

TXZ-45 matsakaici mita shigar da kayan aikin dumama

Babban sigogin fasaha:

1, matsakaicin ikon shigarwar: 45KW

2, mitar motsi: 1-20KHZ

3, halin yanzu fitarwa: 15-95A

4, fitarwa mai fitarwa: 70-550V5, ikon shigar da abubuwa: 380V, 50 ko 60HZ mai hawa uku

5, ƙimar ci gaba da ɗaukar nauyi: 100% awanni 24, aikin ci gaba

6, ƙarar wutar lantarki (CM): 35 fadi × 55 babba × 65 tsayi

7, nauyi: 36KG

8, shigar da buƙatun iskar wutar lantarki: 3 × 125A

9. Buƙatun kebul na wutar lantarki: 25mm2 waya jan ƙarfe mai laushi, kayan aikin waya na ƙasa: 6mm2 waya tagulla mai taushi

10, matsakaiciyar mitar cikakken buƙatun ruwan sanya wutar makera: ≥ 0.2Mpa ≥ 10L / Min

11, matsakaicin ƙarfin wutan lantarki yana buƙatar buƙatun ruwa: ≥ 0.2Mpa ≥ 4L / Min

12, samar da ruwa: mashigar ruwa, kanti

13, Haɗa kayan aikin bututun ruwa na ciki: diamita na ciki 25MM, bututun ruwa na bawul ɗin ruwa: diamita na ciki 25MM, haɗa bututun kayan aikin bututun ruwa: diamita na ciki 8MM,

14, pumpaya daga cikin famfo mai ƙarfi, ƙarfin shine 1.1KW, ɗagawa mita 30-50 ne, kuma akwai wani tafkin mai girman mita 3-4.

Na shida, daidaitattun kayan aiki:

Bakwai, kayan haɗin injin da aka sanya wa abokin ciniki (tsarin sanyaya wurare dabam dabam):

1. Sauyin iska mai sau uku 400A Daya

2. Haɗin wuta mai sassauƙa na USB 90 mm2 metersan mita

3. Hasumiyar sanyi 30 ton 1;

4. Pump 3.0kw/head 30-50 meters 1 set;

5, mashigar kayan aiki da bututun ruwa: babban matsin da aka inganta bututun ruwa na waje diamita 16 mm, diamita na ciki 12 mm mita da yawa

6, mashigar ruwan famfo da bututun ruwa: 1 inch (diamita na ciki 25 mm) a cikin babban matsin wutan da aka ƙarfafa bututu da yawa

Takwas, kayan aikin amfani da matakai:

1, haɗin lantarki: samun dama ga layin samar da wutar lantarki da aka keɓe, bi da bi, sauyin iska sau uku. Sa’an nan kuma haɗa waya ta ƙasa. (Lura cewa ikon wutar lantarki mai hawa uku yakamata ya iya saduwa da amfani da kayan aikin, kuma yakamata a yi amfani da kaurin waya gwargwadon umarnin)

2, ruwa: (ya danganta da ci gaba da lokacin aiki da nauyin aiki) zaɓi tsarin ruwan sanyaya don cimma sanyaya ruwa.

3, ta cikin ruwa: buɗe hanyar ruwa, kuma bincika kayan aikin kowane ruwa don ganin ko akwai fitar ruwa, kwarara da matsin lamba na al’ada ne.

4, iko: da farko buɗe maɓallin wuta na sarrafawa, sannan buɗe maɓallin iska a bayan injin, sannan kunna maɓallin wuta akan kwamiti mai sarrafawa.

5. Farawa: Ya kamata a daidaita ƙarfin wutar lantarki potentiometer zuwa mafi ƙanƙanta kafin fara tanderun farko. Bayan farawa, yakamata a daidaita zafin jiki zuwa ikon da ake buƙata. Danna maɓallin farawa don fara injin. A wannan lokacin, mai nuna dumama akan allon yana haskakawa, da sautin saurin aiki na yau da kullun da walƙiyar aikin walƙiya lokaci guda.
6. Kulawa da auna zafin jiki: A lokacin aikin dumama, galibi an ƙaddara shi ta hanyoyin gani don sanin lokacin da za a daina dumama.

7. Kashewa: Kashewa, na’urar sarrafawa tana kashewa da farko, sannan ku kashe babban wutan lantarki na waje, sannan a jinkirta har zuwa kusan awa 1 bayan zafin wutar makera; sannan kashe kayan sanyaya ruwa, dumama cikin injin kuma don sauƙaƙe murfin shigarwa Ana fitar da zafi.
8. A yankin da yake da saukin daskarewa a lokacin hunturu, ya kamata a lura cewa bayan kowane amfani, yakamata a yi amfani da iska mai matsawa don busar da ruwa a ciki da kuma cikin kayan don hana ruwa tsinke kayan ciki da bututun ruwa a ciki. kayan aiki.

Tara, abokin ciniki narkakkar tagulla narkar da hoton hoto: