Trapezoidal aluminum ingot kayan aikin haɓaka zafin jiki na kan layi

Trapezoidal aluminum ingot kayan aikin haɓaka zafin jiki na kan layi shine tsarin mechatronics. Cikakkun kayan aikin sun haɗa da KGPS300kw/0.2KHZ na matsakaiciyar wutar lantarki, injin induction kwafi, bankin capacitor ramuwa mai amsawa, da tsarin kula da rufaffiyar madauki na kan layi. Saitin layin jagora na zamewa don motsi a kwance na kayan aiki.

Ana amfani da wannan saitin kayan aiki don tayar da zafin jiki na trapezoidal aluminum ingots. The rated ikon kayan aiki ne 300kw, da rated mita ne 200HZ, da kuma online zazzabi ne 60-150 ℃. Fitar da 2350 murabba’in mm aluminum ingots a kowace awa ya fi 4T. Saboda kayan aiki ta atomatik yana daidaita ikon fitarwa, Ana sarrafa amfani da wutar lantarki ta ton na kayan aiki a cikin 60 kWh; Matsakaicin waje na kayan aiki shine 2400 × 1000 × 1300mm, jimlar nauyin kusan 2.5T ne, kuma buƙatar ruwa mai sanyaya shine game da 15 t / h. An tsara kasan kayan aiki tare da layin jagora na layi, wanda zai iya motsa mita 1.1 a kwance don sauƙaƙe cire kayan aiki lokacin da ba a buƙatar yawan mita don dumama.

Kayan aikin suna ɗaukar hanyar sarrafa madauki na yanayin zafi. Ana iya fara kayan aiki bayan ingot na aluminum ya shiga cikin tanderun. Mai amfani kawai yana buƙatar saita yawan zafin jiki na ingot na aluminum, kuma ikon fitarwa na kayan aiki yana daidaitawa ta atomatik bisa ga zafin jiki na farko na aluminum ingot da kuma saitin zafin jiki na ƙarshe, wanda gaba ɗaya ya juyar da kayan aiki iri ɗaya Rashin ikon daidaitawa ba zai iya daidaitawa ba. zafin jiki. Lokacin da kayan aiki ke gudana, babu buƙatar zama kan aiki kwata-kwata. Ko da an dakatar da ingot na aluminum ba zato ba tsammani a cikin tanderun, ƙarfin kayan aiki za a daidaita shi ta atomatik zuwa yanayin adana zafi, kuma ingot na aluminum ba zai wuce zafin da aka ƙayyade ba.