Tanderun graphitization

1) Jikin tanderun yana da tsari na tsaye da a kwance. Ana buɗe murfin a jikin murhu na tsaye, kuma ana buɗe kofofin gaba da na baya a kwance. Ana ɗaukar tsarin sanyaya ruwa mai Layer biyu. Tankin ciki an yi shi da bakin karfe 304.

Ruwan sanyaya yana wucewa ta cikin interlayer. Ba za a iya fitar da jikin tanderu kawai ba, amma kuma ana iya sarrafa shi da iskar gas mai kariya.

2) The tanderun jiki sanye take da wani iska hakar dubawa (don dangane da injin famfo), wani electrode flange budewa, wani infrared zafin jiki auna rami, wani iska kanti, da dai sauransu The tsawo na tushe a cikin tanderun za a iya gyara zuwa ga. daidaita zuwa daban-daban tsayin firikwensin.

3) Murfin tanderu yana ɗaukar ɗagawa na injin injin hannu da juyawa don buɗe murfin. Aikin ya fi ceton aiki kuma ya dace fiye da aikin dabaran hannu. saman murfin murfi yana sanye da ramukan kallo, ramukan auna zafin jiki da mashigan iska.

4) Jikin tanderun yana sanye da kayan rufe fuska, da crucible a cikin tanderun. Sensor, corundum.

3. Na’urar haska bayanai

Inductor an yi shi da bututun jan ƙarfe mai murabba’i mai inganci, tare da ƙarancin ɗigon maganadisu da ingantaccen inganci. Wurin gyara firikwensin firikwensin goyan bayan an yi shi da bakin karfe kuma ba zai zama carbonized a babban zafin jiki ba. Aipud, Hunan.

4. Resonant capacitor

Resonant capacitor yana ɗaukar tsarin sanyaya ruwa, yayin da yake barin gefe na 30%.

5. Infrared thermometer

Ana amfani da ma’aunin zafi da sanyio na infrared da aka shigo da shi don lura da zafin jiki a cikin tanderu a ainihin lokacin.

Binciken auna zafin infrared yana ɗaukar ma’aunin zafin jiki na infrared mai launi biyu da aka shigo da shi, wanda zai iya yin daidaitaccen ma’auni ko da akwai takamaiman adadin hayaki, ƙura da sauran barbashi a cikin tanderun don toshe abin da ake nufi.

6. Vacuum saye tsarin

Ya ƙunshi famfo mai haɗaɗɗiyar kai tsaye, bawul ɗin injin solenoid mai kumburi, bawul ɗin malam buɗe ido, bawul ɗin diaphragm da bututun mai. Ana amfani da bawul ɗin diaphragm 1 don cika iskar gas, ana amfani da 1 don buɗewa

Gaban ƙofar tanderun yana cike da iska don karya injin.

7. Tsarin kula da lantarki

Kayan aikin sarrafa zafin jiki yana amfani da shirin kashi 0.1% na hankali don sarrafa mai sarrafawa. Kayan aikin na iya adana sassan shirye-shiryen dumama 50 kuma ana iya sanye shi da tashar sadarwa ta hanyar zaɓin zaɓi. Tare da PLC kariya, shi zai iya saka idanu da rashin lokaci, ruwa matsa lamba, kewaye, m gas, injin famfo, makera zafin jiki, hukuma zafin jiki, da dai sauransu, da kuma gane da jerin iko da sarkar kariya na samar da wutar lantarki, tanderun jiki, sanyaya ruwa. iskar gas mai kariya da sauran na’urori, da gargadin farko da ƙararrawa Da sauran ayyuka. Idan zafin jiki na tanderun ya wuce digiri 60, za a ba da ƙararrawa. Nau’in injin yana da ƙarancin ruwa kuma yana daina gudu bayan jinkiri; Ba za a iya isa ga ƙararrawar motsi ba.