Induction heating furnace instruction manual

A. Product use

The shigowa dumama tanderu na’urar dumama wutar lantarki ce wacce ke haifar da induction halin yanzu a cikin kayan aiki a madadin filin lantarki bisa ka’idar shigar da wutar lantarki, ta haka za ta dumama aikin. Wannan na’urar ta dace da dumama karfe, simintin ƙarfe da kayan haɗin gwiwa.

B. Technical specifications and basic requirements

1. Bayanan fasaha

2. Basic requirements

2.1. Sharuɗɗan fasaha na wannan samfurin sun bi ƙa’idodin da suka dace a cikin GB10067.1-88 da GB10067.3-88 .

2.2. This product should work under the following conditions:

Altitude: < 1000 meters;

Yanayin zafin jiki: 5 ~ 40 ℃;

Monthly average maximum relative humidity ≤ 90 %;

Babu ƙura mai ƙura, fashewar gas ko iskar gas da za ta iya lalata ƙarfe da kayan da ke kewaye da kayan aiki sosai;

Babu rawar jiki a fili;

Water quality:

Taurin: CaO <10mg daidai;

Acidity da alkalinity: Ph=7 ～8.5 ;

Daskararrun da aka dakatar <10mg/L;

Water resistance> 2.5K Ω;

Abubuwan ƙarfe <2mg .

C. Brief description of structure and work process

Wannan kayan aiki yana kunshe da tallafi, fassarar, na’urar ɗagawa, jikin tanderun da ma’aunin wutar lantarki na tsaka-tsaki, ma’ajin capacitor, kebul mai sanyaya ruwa, akwatin maɓallin sarrafawa da sauran na’urori.

Takaitaccen bayanin tsarin amfani:

1. Zaɓi tubalin tallafi da ake buƙata bisa ga kayan aikin dumama (duba Table 1), da kuma sanya tubalin tallafi da kayan aiki a kan dandamali na ɗagawa don matsayi, kuma motsa kayan aiki don tsayawa a wurin.

2. The second step : Select the sensor that is compatible with the workpiece ( see Table 2 ) . The lifting table will work to place the sensor and the heating workpiece in the same center, with equal clearances on all sides.

3. Bayan tsarin ɗagawa yana cikin wurin, zai tsaya ta atomatik kuma ya fara samar da wutar lantarki na matsakaici don dumama. Lokacin da zafin jiki ya kai, zai sauke ta atomatik ko da hannu kuma ya motsa don kammala dumama.

4. Bayani:

Yin la’akari da radiation filin Magnetic, da tsawo na tubalin goyon baya da tsawo na workpiece, daɗaɗɗen ɗagawa ya fi tsayi, dangane da tsakiyar tsarin fassarar, kuma girman budewa a bangarorin biyu shine 2100mm a tsayi. , 50mm a faɗi da 150 a zurfin. Duba hoton da ke ƙasa don cikakkun bayanai:

Table I

Bayani dalla-dalla da kayan aiki masu dacewa:

Table II

Bayani dalla-dalla na firikwensin da kayan aiki masu dacewa