Ntuziaka ntụziaka ọkụ ọkụ induction

A. Iji ngwaahịa

The induction kpo oku bụ ngwaọrụ kpo oku eletrik nke na-emepụta ihe ntinye ugbu a n’ime ihe nrụnye n’ime oghere electromagnetic ọzọ dabere na ụkpụrụ nke induction electromagnetic, si otú ahụ kpoo workpiece. Ngwaọrụ a dị mma maka ikpo ọkụ ígwè, ihe nkedo na alloys ya.

B. Nka na ụzụ nkọwa na isi chọrọ

1. Nka na ụzụ nkọwa

Nọmba usoro n’usoro	oru ngo	unit	oke	jaa
2	ike	kw	300
3	Oge akara	Hz	1000
5	operating okpomọkụ	Celsius C	1000
7	Ime ka mmiri na-agba ume	Mpa	0.2 na 0.4

2. Ihe ndị bụ isi chọrọ

2.1. Ọnọdụ teknụzụ nke ngwaahịa a na-agbaso ụkpụrụ ndị dị mkpa na GB10067.1-88 na GB10067.3-88.

2.2. Ngwaahịa a kwesịrị ịrụ ọrụ n’okpuru ọnọdụ ndị a:

Elu: <1000 mita;

Ọnọdụ okpomọkụ: 5 ℃ 40 ℃;

Nkezi oke iru mmiri kwa ọnwa ≤ 90 %;

Enweghị uzuzu na-eduzi, gas na-agbawa agbawa ma ọ bụ gas na-emebi emebi nke nwere ike imebi ígwè na ihe mkpuchi gburugburu akụrụngwa;

Enweghị ịma jijiji doro anya;

Ogo mmiri:

Isi ike: CaO <10mg nhata;

Acidity na alkalinity: Ph=7 ~ 8.5 ;

Ihe siri ike kwụsịtụrụ <10mg/L;

Mmiri na-eguzogide> 2.5K Ω;

Ọdịnaya iron <2mg .

C. Nkọwa nkenke nke nhazi na usoro ọrụ

Ihe mejupụtara akụrụngwa a bụ nkwado, ntụgharị, ngwaọrụ na-ebuli elu, ahụ ọkụ na kabinet ike nke etiti, kabinet capacitor, eriri mmiri jụrụ oyi, igbe bọtịnụ njikwa na ngwaọrụ ndị ọzọ.

Nkọwa nkenke nke usoro ojiji:

1. Họrọ brik nkwado achọrọ dị ka ihe ọkụkụ na-ekpo ọkụ (lee Tebụl 1), ma tinye brik nkwado na ihe na-arụ ọrụ n’elu ikpo okwu na-ebuli elu maka ịkwado, ma mee ka ọrụ ahụ kwụsị n’ebe ahụ.

2. Nzọụkwụ nke abụọ : Họrọ ihe mmetụta nke dakọtara na workpiece (lee Isiokwu 2). Tebụl na-ebuli elu ga-arụ ọrụ iji tinye ihe mmetụta na ọkụ ọkụ na-arụ ọrụ n’otu etiti ahụ, na-ekpochapụ nha anya n’akụkụ niile.

3. Mgbe usoro ihe na-ebuli elu dị, ọ ga-akwụsị na-akpaghị aka ma malite ike ọkụ nke etiti etiti maka ikpo ọkụ. Mgbe okpomọkụ ruru, ọ ga-akpaghị aka ma ọ bụ aka ya daa ma kwaga iji mechaa kpo oku.

4. Nkọwa:

N’iburu n’uche ọkụ ọkụ magnetik, gbakwunyere ịdị elu nke brik na-akwado na ịdị elu nke workpiece, ihe nkedo na-ebuli elu dị ogologo, dabere na etiti usoro nsụgharị, na nha nke oghere n’akụkụ abụọ bụ 2100mm n’ogologo. , 50mm n’obosara na 150 na omimi. Lee foto dị n’okpuru maka nkọwa:

Isiokwu M

Nkọwapụta ebu na workpieces kwekọrọ:

Nkọwapụta workpiece	Jiri nkọwapụta ebu
[Phi] ime = 1264mm ime [Phi] = 1213mm	φ Outer 1304 High 130
[Phi] ime = 866mm ime [Phi] = 815mm	φ Outer 898 Elu 200
φ=660mm	φ Outer 692 Elu 230
n’ime [phi] = 607mm	φ 639 elu 190
φ=488mm	φ 508 elu 80

Isiokwu II

Ihe mmetụta sensọ na workpieces kwekọrọ

Nkọwapụta workpiece	Jiri nkọwa ihe mmetụta
[Phi] ime = 1264mm ime [Phi] = 1213mm	φ n’ime 1370
φ=866mm φ=815mm	φ n’ime 970
φ=660mm φ=607mm	φ n’ime 770
φ=488mm	N’ime afọ 570