Menene fa’idodin matsakaicin mitar shigar da wutar lantarki a cikin dumama da ƙirƙira?

Matsakaicin matsakaici shigowa dumama tanderu na’urar samar da wutar lantarki ce wacce ke juyar da wutar 50HZ AC zuwa mitar matsakaici (daga 300HZ zuwa 1000HZ). Tunda ka’idar matsakaicin mitar induction dumama shine shigar da wutar lantarki, zafinsa yana haifar da shi a cikin kayan aikin da kansa. Ma’aikata na yau da kullun suna amfani da tanderun lantarki na tsaka-tsaki bayan sun tafi aiki. Za’a iya aiwatar da ci gaba da aikin ƙirƙira a cikin mintuna goma, ba tare da buƙatar ƙwararrun ma’aikatan tanderu don yin aikin harba tanderun da hatimi a gaba ba. Saboda saurin dumama farashin wannan hanyar dumama, akwai ƙarancin oxidation. Rashin iskar shaka mai ƙonawa na tsaka-tsakin injunan dumama na tsaka-tsaki shine kawai 0.5%, asarar iskar iskar gas ɗin dumama tanderun iskar gas shine 2%, kuma tanderun da aka kora da gawayi shine 3%. Tsarin dumama matsakaicin mitar yana adana kayan. Idan aka kwatanta da tanderun da aka harba gawayi, ton na jabu na iya ajiye akalla kilogiram 20-50 na albarkatun karfe.

Matsakaicin mitar shigar da wutar lantarki yana da fa’idodi guda biyar na musamman a cikin dumama da ƙirƙira:

Na farko, saurin narkewa da dumama na matsakaicin mitar induction dumama tanderun yana da sauri, zafin wutar tanderun yana da sauƙin sarrafawa, kuma ingancin samarwa yana da girma.

Na biyu, tsarin aiki na matsakaicin mitar shigar da wutar lantarki ya dace, mai sauƙin koya, da sauƙin sarrafawa.

Na uku, zafin jiki a kusa da tanderun na tsaka-tsakin mitar shigar da wutar lantarki yana da ƙasa, akwai ƙananan hayaki da ƙura, kuma yanayin aiki yana da kyau, wanda ya dace da ra’ayi na zamani na ceton makamashi da kare muhalli.

Na hudu, matsakaicin mitar shigar da tanderun dumama yana da ingantaccen narkewa, kyakkyawan tanadin makamashi da tasirin ceton ƙarfi, ƙaramin tsari da ƙarfin yin nauyi mai ƙarfi.

Na biyar, ƙimar amfani da tanderu na matsakaicin mitar induction dumama tanderun yana da girma, kuma ya dace sosai don maye gurbin jikin tanderun.

Ka’idar aiki na matsakaicin mitar induction dumama tanderun shine: ana gyara wutar lantarki mai juzu’i uku zuwa na yanzu kai tsaye, sannan kuma ana canza halin yanzu zuwa mitar mitar mai daidaitacce, da matsakaicin mitar wutar lantarki mai gudana ta cikin capacitor. kuma ana kawo coil induction. Ana samar da manyan layukan maganadisu na ƙarfi a cikin zobe, kuma an yanke kayan ƙarfe da ke cikin zoben ƙaddamarwa, kuma ana haifar da babban ƙarfin wuta a cikin kayan ƙarfe. A halin yanzu, matsakaicin mitar induction dumama tanderun ana amfani dashi a cikin: kayan walda; maganin zafi; diathermy kafa kayan aiki da sauran filayen.