Yadda za a daidaita bututun ƙarfe induction dumama shingen murhu da tebur na abin nadi?

1. A total of 6 steel pipe shigowa dumama tanderu brackets are installed between the roller tables for the installation of inductors.

2. Don hana ƙwanƙwasa daga zafi, farantin ƙasa na firikwensin da babban farantin katako an yi shi da allon epoxy.

3. Don bututun ƙarfe na diamita daban-daban, ana buƙatar maye gurbin firikwensin daidai kuma ana iya daidaita tsayin tsakiya.

4. An yi rami mai ƙyalli na firikwensin a cikin rami mai tsayi mai tsayi don daidaitawa mai sauƙi.

5. Za’a iya daidaita tsayin tsakiya na firikwensin ta hanyar ƙwanƙwasa a cikin farantin hawan firikwensin.

6. Biyu masu haɗa sandunan tagulla a ƙasan inductor da kebul mai sanyaya ruwa daga capacitor cabinet kowanne an haɗa su da 4 bakin karfe (1Cr18Ni9Ti).

7. Ruwan shigar ruwa da bututu na firikwensin da babban bututun ruwa suna haɗuwa ta hanyar haɗin gwiwa da sauri da sauri, waɗanda ba su da tasiri ta kurakuran matsayin su, don haka za a iya haɗa hanyar ruwa ta firikwensin da sauri.

8. Ana iya maye gurbin na’urori masu auna firikwensin da sauri, kowane lokacin maye gurbin bai wuce minti 10 ba, kuma an sanye da trolley ta hannu don maye gurbin na’urorin.

9. An ƙera tanderun dumama bututun ƙarfe na ƙarfe tare da kafaffen sashi wanda za’a iya daidaitawa sama da ƙasa. Ta hanyar gyare-gyaren mai ɗaukar tsutsotsi na hannu, yana yiwuwa a gane cewa tsakiyar layin wutar lantarki na ƙayyadaddun bayanai daban-daban suna daidai da tsayi. Yana iya yadda ya kamata tabbatar da cewa karfe bututu smoothly wuce ta inductor ba tare da buga jikin tanderu. Matsakaicin daidaitawa na wannan na’urar shine ± 50, dace da φ95-φ130 bututun ƙarfe.