- 11
- Nov
Šesterokutna šipka od epoksidnih staklenih vlakana
Šesterokutna šipka od epoksidnih staklenih vlakana
Epoxy glass fiber hexagonal rod Procurement of glass fiber pultruded hexagonal rod
The insulated hexagonal rod is made of glass fiber filaments impregnated with epoxy resin matrix by high temperature pultrusion. The company adopts a production line with full CNC vacuum demoulding and pultrusion technology. The production line has reached the current international level. It is equipped with an online speed tracker and a temperature control system to improve the uniformity and heat resistance of the insulating rod. It is produced by Bipu FRP and unsaturated resin. The equipment has better stability and controllability. This product is suitable for use in electrolytic aluminum plants, where the short-circuit port of the electrolytic cell is used as an insulating bolt. It is an ideal substitute for MPI insulation bolts.
Technical parameters of hexagonal bar
Serijski broj | projekt | jedinica | Tehnički indeks |
1 | gustoća | g / cm3 | ≥ 2.1 |
2 | Vlačna čvrstoća | Mpa | ≥ 1360 |
3 | Siphon test | minuta | > 20 |
4 | Water diffusion test | mA | <0.03 |
5 | Ispitajte naponski test | kv | > 100 |
6 | Korozija od naprezanja | h | > 96 |
7 | Jačina savijanja | Mpa | ≥ 100 |
8 | Hot bending strength | Mpa | ≥ 260 |
9 | Volumenski otpor | Ω.m | ≥ 1012 |
10 | Fiber content | % | ≥ 80 |
11 | Power frequency breakdown voltage | Kv/cm | ≥ 100 |
12 | Full wave impulse voltage | Kv/cm | ≥ 95 |
13 | Upijanje vode | % | <0.05 |