Mjere opreza za ugradnju peć za prigušivanje

Muflna peć ima karakteristike velike brzine zagrijavanja, dobrog izolacijskog učinka, visokog faktora sigurnosti te sigurnosti i pouzdanosti. Široko se koristi u termičkoj obradi malih izradaka, kao i pri kontroli i analizi. Dobre stvari se mogu naširoko koristiti, ali dobre stvari su neodvojive od ispravnog i sigurnog rada. Dopustite nam da shvatite mjere opreza pri instalaciji, kako slijedi:

1. After opening the package, check whether the muffle furnace is intact and whether the accessories are complete.

2. The general muffle furnace does not need special installation. It only needs to be placed flat on a solid cement table or shelf indoors, and there should be no flammable and explosive materials around. The controller should avoid vibration, and the location should not be too close to the electric furnace to prevent internal components from not working properly due to overheating.

3. Umetnite termoelement u peć za 20-50 mm, a prazninu između rupe i termoelementa ispunite azbestnim užetom. Spojite termoelement na kompenzacijsku žicu za regulator (ili koristite izoliranu čeličnu žicu s jezgrom), obratite pozornost na pozitivni i negativni pol i nemojte ih spajati obrnuto.

4. A power switch needs to be installed at the power cord lead-in to control the main power supply. In order to ensure safe operation, the muffle furnace and the controller must be reliably grounded.

5. Before use, adjust the thermostat to the zero point. When using the compensation wire and cold junction compensator, adjust the mechanical zero point to the reference temperature point of the cold junction compensator. When the compensation wire is not used, the mechanical zero point is adjusted. To the zero scale position, but the temperature indicated is the temperature difference between the measuring point and the cold junction of the thermocouple.

6. ​​Adjust the set temperature to the required operating temperature, and then turn on the power. Turn on work, the muffle furnace is energized, and the input current, voltage, output power and real-time temperature are displayed on the control panel. As the internal temperature of the electric furnace increases, the real-time temperature will also increase. This phenomenon indicates that the system is working normally.