- 09
- Sep
tungku peleburan induksi 5T
5T tungku peleburan induksi
1. itu 5T tungku peleburan induksi terdiri dari:
3000kw intermediate frequency power supply – capacitor cabinet – aluminum shell or steel shell furnace – hydraulic tilting furnace system – remote control box – ZXZ-N320T ( 70/250) closed loop cooling tower.
2. harga 5T tungku peleburan induksi
Harga tungku peleburan induksi 5T dihitung sesuai dengan kekuatan catu daya frekuensi menengah dan volume badan tungku. Harga konfigurasi yang berbeda bervariasi. Harga ini hanya untuk referensi. Hubungi kami akan memiliki harga yang sangat rendah, silakan berkonsultasi dengan harga tertentu.Firstfurnace@gmail.com
| Nomor seri | Nama barang | Model spesifikasi | satuan | Jumlah | Harga |
| 1 | JIKA kabinet daya | 3000KW/5T/500HZ | aet | 1 | 260000 |
| 2 | Kabinet kapasitor | 2 . 0 – 4 000-1S | set | 1 | 100000 |
| 3 | Cangkang baja tungku 5T | GW-5T | set | 1 | 250000 |
| 4 | Kabel berpendingin air | LHSD- 600 | set | 4 | 30000 |
| 5 | percobaan | 5T tungku didedikasikan | set | 1 | 3000 |
| Jumlah: 643,000 | |||||
3.pilihan 5T tungku peleburan induksi konfigurasi terkait
| Frekuensi menengah
Sumber Daya listrik |
Working form: rectifier series inverter series (SCR) 6- phase12- pulse ( one power supply two furnace body ) |
| The cross-sectional area of the incoming copper bar : 1000mm2 copper row 100x10mm copper row within 10 meters. | |
| Cabinet shell: a rectifier cabinet Inverter cabinet a1500x4000x2200mm 1500x1500x2200mm | |
| Power efficiency ≥98% Cabinet material: main frame carbon steel, cabinet door: aluminum alloy. | |
| Start mode: variable frequency buffer start | |
| Tingkat startup: 100% (termasuk beban berat) | |
| Rated frequency: 3 0 0Hz -500Hz | |
| AC voltage: 575 V rectifier series | |
| DC voltage: 1550 V | |
| IF voltage: 3400v | |
| Arus DC: 2340 A | |
| Incoming AC current: 1900 A | |
| Frekuensi masukan: 50Hz | |
| Rectifier 2 ways in series and then parallel, inverter form:inverter parallel or inverter series | |
| Berat: 5000 KG atau lebih | |
| Circulating water volume: closed – loop water cooling towerZXZ-N320T ( 70/250) | |
| Tubuh tungku | Rated capacity: 5 0 0 0KG |
| Kapasitas maksimum: 5300 KG | |
| Rated power: 3500 KW | |
| Frequency: 300 Hz | |
| Faktor daya: 0.9 6 | |
| Working mode: one electric two furnace | |
| Melting time : 55 minutes ± 5% | |
| Working temperature: 1 550 °C | |
| Loading height: 1550 mm Hearth height: 1250mm | |
| Loading diameter: 910 mm (upper mouth) inner diameter of the ring: 1100mm ring copper tube is 40x70x8mm | |
| Loading diameter: 825 mm (lower) Inner diameter of the ring:1100mm | |
| Furnace copper tube: 55x65x8mm 15匝 , weight 2500 , total length: 164 meters | |
| Sudut maksimum tungku miring: 95 ° | |
| Mode outlet: outlet samping | |
| Yoke : Covering area 80% . Thickness: 0.35mm | |
| Metode memiringkan: hidrolik | |
| Unit power consumption: 520 ± 5% kW.h/t 1550 ° C | |
| Tegangan kerja: 3400V | |
| Dimensi: | |
| transformator | Rated capacity: 3150KVA a |
| Tegangan primer: 10KV | |
| Secondary voltage: 1500v | |
| Satu fase: 3 fase | |
| Nomor fase sekunder: 6 fase 12 vena | |
| Bentuk keluaran: tiga tiga Y | |
| Hidrolik | Silinder hidrolik: |
| Tekanan kerja: 10Mpa | |
| Diameter: Φ 320 plunger cylinder | |
| Itinerary: 2 107mm | |
| 3 aliran: > 26L/Min | |
| Stasiun hidrolik: | |
| Tekanan kerja: 10Mpa | |
| Pompa hidrolik: pompa ganda ganda | |
| Bentuk: Horisontal | |
| Capacity: 12 00L | |
| konsul | Mode: Listrik (indikator aksi) |
| air pendingin
sistem |
Integrated layered tower closed – loop water cooling towerZXZ-N320T ( 70/250) |
| Cooling capacity 18 0000 0 kcal/h cooling water volume 35 0m3/h Fan power 11 KW × 2 units Fan air volume 12 5000m3/h ×2 Spray pump 190 m3/h ; 4 kw main motor 30kw
Dimensions mm 53 00×2 3 00× 4910 (one size) |
|
| Pipa saluran | Pipe material: PPR, pipe diameter: DN125X2=DN250 , watersupply port DN65 , total length of water pipe within 30meters. The electrical control cabinet is within 5 meters of the power supply cabinet . |