- 09
- Sep
5T感應熔煉爐
5T 感應熔煉爐
1。 該 5T 感應熔煉爐 由組成：
3000kw intermediate frequency power supply – capacitor cabinet – aluminum shell or steel shell furnace – hydraulic tilting furnace system – remote control box – ZXZ-N320T ( 70/250) closed loop cooling tower.
2. 的價格 5T 感應熔煉爐
5T感應熔煉爐的價格是根據中頻電源功率和爐體體積計算的。 不同配置價格不同。 此價格僅供參考。 聯繫我們會有很低的價格，具體價格請諮詢。Firstfurnace@gmail.com
| 序列號 | 項目名 | 規格型號 | 單位 | 數量 | 價格¥ |
| 1 | 中頻電源櫃 | 3000KW/5T/500HZ | aet | 1 | 260000 |
| 2 | 電容櫃 | 2 . 0 – 4 000-1S | Wi-Fi： | 1 | 100000 |
| 3 | 5T爐鋼外殼 | GW-5T | Wi-Fi： | 1 | 250000 |
| 4 | 水冷電纜 | LHSD-600 | Wi-Fi： | 4 | 30000 |
| 5 | 坩 | 5T爐專用 | Wi-Fi： | 1 | 3000 |
| 總計：¥ 643,000 | |||||
3.選擇 5T 感應熔煉爐 相關配置
| 中頻
電源 |
Working form: rectifier series inverter series (SCR) 6- phase12- pulse ( one power supply two furnace body ) |
| The cross-sectional area of the incoming copper bar : 1000mm2 copper row 100x10mm copper row within 10 meters. | |
| Cabinet shell: a rectifier cabinet Inverter cabinet a1500x4000x2200mm 1500x1500x2200mm | |
| Power efficiency ≥98% Cabinet material: main frame carbon steel, cabinet door: aluminum alloy. | |
| Start mode: variable frequency buffer start | |
| 啟動率：100%（包括重載） | |
| Rated frequency: 3 0 0Hz -500Hz | |
| AC voltage: 575 V rectifier series | |
| DC voltage: 1550 V | |
| IF voltage: 3400v | |
| 直流電流：2340A | |
| Incoming AC current: 1900 A | |
| 輸入頻率：50Hz | |
| Rectifier 2 ways in series and then parallel, inverter form:inverter parallel or inverter series | |
| 重量：5000KG左右 | |
| Circulating water volume: closed – loop water cooling towerZXZ-N320T ( 70/250) | |
| 爐體 | Rated capacity: 5 0 0 0KG |
| 最大容量：5300 KG | |
| Rated power: 3500 KW | |
| Frequency: 300 Hz | |
| 功率因數：≥0.9 6 | |
| Working mode: one electric two furnace | |
| Melting time : 55 minutes ± 5% | |
| Working temperature: 1 550 °C | |
| Loading height: 1550 mm Hearth height: 1250mm | |
| Loading diameter: 910 mm (upper mouth) inner diameter of the ring: 1100mm ring copper tube is 40x70x8mm | |
| Loading diameter: 825 mm (lower) Inner diameter of the ring:1100mm | |
| Furnace copper tube: 55x65x8mm 15匝 , weight 2500 , total length: 164 meters | |
| 傾爐最大角度：95° | |
| 出線方式：側出線 | |
| Yoke : Covering area 80% . Thickness: 0.35mm | |
| 傾斜方式：液壓 | |
| Unit power consumption: 520 ± 5% kW.h/t 1550 ° C | |
| 工作電壓：3400V | |
| 外形尺寸： | |
| 變壓器 | Rated capacity: 3150KVA a |
| 一次電壓：10KV | |
| Secondary voltage: 1500v | |
| 一相：三相 | |
| 次生相數：6相12脈 | |
| 輸出形式：三△三Y | |
| 液 | 液壓缸： |
| 工作壓力：10Mpa | |
| Diameter: Φ 320 plunger cylinder | |
| Itinerary: 2 107mm | |
| 3 流量：> 26L/Min | |
| 液壓站： | |
| 工作壓力：10Mpa | |
| 液壓泵：雙泵雙 | |
| 形式：臥式 | |
| Capacity: 12 00L | |
| 控制台 | 方式：電動（動作指示燈） |
| 冷卻水
系統 |
Integrated layered tower closed – loop water cooling towerZXZ-N320T ( 70/250) |
| Cooling capacity 18 0000 0 kcal/h cooling water volume 35 0m3/h Fan power 11 KW × 2 units Fan air volume 12 5000m3/h ×2 Spray pump 190 m3/h ; 4 kw main motor 30kw
Dimensions mm 53 00×2 3 00× 4910 (one size) |
|
| 管道 | Pipe material: PPR, pipe diameter: DN125X2=DN250 , watersupply port DN65 , total length of water pipe within 30meters. The electrical control cabinet is within 5 meters of the power supply cabinet . |