Aluminom mkpara, aluminom ingot igwe induction igwe eji eme oku

Nchịkọta 1:

Aluminom mkpanaka na aluminum ingot induction igwe kpo oku dị mma maka ikpo ọkụ na ntanetị na ikpo ọkụ nke trapezoidal aluminom mkpara na aluminom ingots. Akụrụngwa bụ usoro ntinye aka nke electromechanical. Ngwa ngwa zuru oke gụnyere ọkụ ọkụ etiti KGPS300kw/0.2KHZ, igwe ọkụ induction nṅomi, yana ike na-emeghachi omume. Otu set nke akwụ ụgwọ capacitor akụ, otu set nke okpomọkụ on-line mechiri emechi-loop akara usoro, otu set nke slide ndu okporo ígwè maka kehoraizin ije nke akụrụngwa, otu set nke mmiri jụrụ usoro (nhọrọ), wdg.

A na-eji ngwa ngwa a eme ihe maka ịkwalite okpomọkụ nke ntanetị nke trapezoidal aluminum ros and aluminum ingots. The gosiri ike nke akụrụngwa bụ 300kw, ndị gosiri ugboro bụ 200HZ, na online okpomọkụ bụ 60-150 ℃. Mmepụta nke mkpanaka aluminom na aluminom ingots nwere akụkụ obe nke 2350 square millimeters karịrị 4T kwa elekere. Ngwá ọrụ na-akpaghị aka na-edozi ike mmepụta, na ike oriri kwa ton nke akụrụngwa na-achịkwa n’ime 60 kWh; Mpụga akụkụ nke akụrụngwa bụ 2400 × 1200 × 1300mm (ma ọ bụ dị ka onye ọrụ chọrọ), ngụkọta arọ bụ banyere 2.5T, na mmiri chọrọ bụ banyere 15 t / h. A na-emepụta ala nke akụrụngwa ya na ntuziaka linear, nke nwere ike ịkwaga ihe dị ka mita 1 n’ahịrị iji mee ka mwepụ nke ngwá ọrụ dị mfe ma ọ bụrụ na ọ dịghị mkpa ugboro ugboro maka ikpo ọkụ.

Akụrụngwa ahụ na-anabata usoro njikwa ọkụ mechiri emechi (a na-ahazikwa ọrụ ntuziaka). Enwere ike ịmalite akụrụngwa mgbe mkpanaka aluminom na aluminom ingots banye n’anụ ọkụ. Naanị onye ọrụ kwesịrị ịtọ okpomọkụ nke mkpanaka aluminom na ingots aluminum. Ike mmepụta nke akụrụngwa na-adabere na mkpanaka aluminom, Ndozi akpaka nke mbụ okpomọkụ nke aluminom ingot na setịpụrụ okpomọkụ ikpeazụ kpamkpam kpamkpam na-emebi ihe na-adịghị mma na ngwá ọrụ ndị yiri ya enweghị ike imezi okpomọkụ site n’ịgbanwe ike. Mgbe akụrụngwa na-agba ọsọ, ọ dịghị mkpa ka ọ bụrụ ọrụ ọ bụla. Ọbụna ma ọ bụrụ na mkpanaka aluminom na aluminom ingots adịghị ebugharị na mberede na ọkụ ọkụ, ike nke ngwá ọrụ ahụ ga-emezi ozugbo na ọnọdụ nchekwa okpomọkụ, na ihe ndị na-emepụta ihe na aluminum ingots agaghị ere ọkụ.

Igwe ọkụ na-ekpo ọkụ okpukpu abụọ nwere njirimara nke nnukwu akpaaka, mmụba ngwa ngwa ngwa ngwa, obere okpomọkụ dị iche n’etiti mkpanaka aluminum na aluminum ingot core, nchekwa ike na mbelata oriri, na arụ ọrụ kwụsiri ike na ntụkwasị obi. A na-emepụta ndụ ọrụ nke ihe eji arụ ọrụ zuru oke ma mepụta ya ka ọ bụrụ ihe na-erughị afọ 20.

1. Nhọrọ nka nka nke mkpanaka aluminom na igwe ingot induction igwe kpo oku

3. Nkọwa teknụzụ eletrik

Akụkụ eletriki nke akụrụngwa zuru oke gụnyere kabinet njikwa ọkụ na-enye ọkụ na-adị etiti, sistemu njikwa ọkụ mechiri emechi, njikwa njikwa mpụga, ụlọ akụ capacitor na-akwụghachi ike, wdg.

4. Nkọwa nke ahụ ọkụ induction

Ọkụ induction na-agụnye ahụ ọkụ eletrik, njikọ mmanya ọla kọpa, ngwa agha refractory, sistemu nkesa mmiri, wdg.