site logo

How to choose a 1 T induction melting furnace?

How to choose a 1 T induction melting furnace?

1 T energy-saving 誘導溶解炉 is a commonly used scrap steel melting furnace, which is mostly used in the foundry industry to smelt scrap steel and then pour it into castings. Summarize the parameters of 1 T energy-saving induction melting furnace to share with you.

構図 Induction melting furnace parameters KGPS-1T-380V induction melting furnace KGPS-1T-575 Induction Melting Furnace
電気キャビネット Rated phase advance voltage 380V, intermediate frequency output voltage (induction furnace) 750V 575V, intermediate frequency output voltage (induction furnace) 1100V
KK SCR 1200A/1000V 8 (Xiangfan platform) 1000A/1800V 8 (Xiangfan platform)
KP SCR 1200A/1000V 6 (Xiangfan platform) 1000A/2500V 6 (Xiangfan platform)
エアスイッチ 2000A/electric 2000A/electric
Installed copper bar 60mm X 5mm
原子炉 Copper tube diameter 16 mm, number of coils: 6 Copper tube diameter 16 mm, number of coils: 8
capacitor cabinet 2000KF /750V 6 units (Xinanjiang) 2000KF /1200V 8 sets (Xinanjiang)
ストーブ ストーブ
furnace shell 直径910mm高さ1300mm 直径1100mm高さ1350mm
誘導コイル内径 660 mm 630 mm
Induction coil number 17周 25周
Induction coil copper tube specifications 25mm X 40mm X 4mm 25mm X 30mm X 3mm
Induction melting furnace‍Features 1. The protection speed is fast, the thyristor is durable, the startup performance is good, the work is stable, and the operation is convenient.
2. Adopt large copper row installation machine to save electricity.
3. The furnace bottom heat dissipation ring is installed, the furnace bottom heats up small, the furnace bottom is durable, it is not easy to wear the furnace, and the furnace bottom loss is small; using a booster circuit, the two voltages of the electric furnace can reach 1800V (2 times the output voltage of the electric cabinet), Water cable, induction coil loss is small
with ZS11-750KW electric furnace transformer (in line with home standards, Haishan approved), under normal circumstances, 1 T molten iron can be melted in 60 minutes, and the electricity used for melting T molten iron is about 700 degrees.
1. The protection speed is fast, the thyristor is durable, the startup performance is good, the work is stable, and the operation is convenient.
2. Adopt large copper row installation machine to save electricity.
3. The furnace bottom heat dissipation ring is installed, the furnace bottom heats up small, the furnace bottom is durable, it is not easy to wear the furnace, and the furnace bottom loss is small; using a booster circuit, the two voltages of the electric furnace can reach 2600V (2 times the output voltage of the electric cabinet), The loss of water cable and induction coil is small; the loss of 700V phase-in voltage, reactor, installed copper bar, and phase-in cable is small.
Equipped with ZS11-750KW transformer for electric furnace (according to home standards and approved by Haishan), under normal circumstances, 1 T molten iron can be melted in 50 minutes, and the electricity used for melting T molten iron is about 600 degrees.