Cara pangopènan frekuensi penengah induction melting furnace

Pangopènan tungku lebur induksi frekuensi penengah kalebu pangopènan sistem listrik, sistem hidrolik lan sistem pendinginan banyu. Pisanan, pangopènan sistem listrik mbutuhake inspeksi saben dina saka komponen listrik ing kabinèt sumber daya frekuensi penengah, lan pemeriksaan rutin komponen ing kabinet lan bar tembaga. Copot bledug; ngencengi bolts nyambungake saka bar tembaga saben minggu, mriksa apa plywood saka bar tembaga wis discolored utawa ngeculke, lan ngatasi masalah ing wektu; kencengake bolt sikil reaktor smoothing saben sasi.

Secondly, in the maintenance process of the hydraulic system, regular inspection and repair should be strengthened according to the frequency of use of the components and its own characteristics. The leakage test of the oil cylinder and valve must be carried out every day, and the oil pump and oil level must be tested regularly every week. Carry out an oil quality test every six months to ensure that the oil temperature in the mailbox is below 55°C. Finally, we must pay attention to the maintenance of the water cooling system. According to survey data, more than half of the failures of the intermediate frequency induction melting furnace are caused by the water cooling system.

Nalika nindakake pangopènan cooling banyu, sampeyan kudu nindakake inspeksi titik lan patroli, mriksa suhu banyu, aliran banyu, tekanan banyu, lan sapiturute, lan nemokake masalah ing wektu. Kajaba iku, strictly ngontrol suhu banyu inlet. Yen suhu banyu inlet kurang, nggawe kondensasi listrik kadhemen katon ing permukaan komponen, sing bisa nyebabake grounding, bocor, sirkuit cendhak, lan nyebabake kacilakan safety.