연속 주조 빌렛 가열로의 장점:

1. The continuous casting billet 가열로 has different degrees of curvature according to different steel types. If the steel billet has a curvature greater than 3mm/m before entering the electric furnace, you can adjust the size of the inductor to meet your requirements according to your steel grade.

2. 노에 들어가기 전 표면 온도 및 빌릿 출구 온도: 사용자의 요구에 따라 설계 및 생산합니다. 빌릿은 균일하게 가열되고 과연성, 균열이 없으며 인장 강도와 진직도는 사용자의 요구를 충족시킬 수 있습니다.

3. 연속 주조 빌렛 가열로의 전체 가열 공정은 PLC 자동 제어를 구현하고 가열 수량과 같은 생산 기록을 적시에 표시합니다. 이 콘솔은 특별히 사용자 정의된 man-machine 인터페이스, 매우 사용자 친화적인 작동 지침 및 간단한 작동으로 단독으로 사용됩니다.

4. Feeding and guiding system: each axis is driven by an independent motor reducer, multi-axis drive is set, and a single inverter is controlled to synchronize the multi-axis operation. The components are high-quality components, reliable in quality, and stable in operation. 304 non-magnetic stainless steel guide wheel is used to maintain moderate elasticity in the axial direction of the guide wheel to adapt to the bending within the allowable range of the billet.

5. Closed-loop temperature control. The closed-loop control system is composed of American Leitai infrared thermometer and German Siemens S7. According to the initial temperature and feed rate of the billet entering the induction heater, the power supply is automatically adjusted to keep the heating temperature constant before being discharged. The workpiece is heated evenly.

6. The continuous casting billet heating furnace adopts intermediate frequency double rectification twelve-pulse or twenty-four-pulse KGPS100-1000KW single power supply for independent use or multiple power supplies for parallel use. Users can rest assured to use, safe and reliable, energy saving and environmental protection, simple operation.