Billet induction heating equipment

The billet induction heating equipment is the equipment used by the continuous casting and rolling manufacturers to increase the temperature of the billet. The relevant parameters of the billet induction heating equipment are as follows:

1) The billet needs to be increased by 300°C, from 750°C to 1050°C.

2) Production capacity: 180T/H, blank specifications: 150x150x12000mm, 180x180x12000mm

3) Working mode: continuous, inline

4) Working mode: According to the pyrometer set in front of the induction heating unit, the temperature of the billet is automatically increased.

5) Workpiece temperature distribution: the temperature distribution characteristics of the continuous sleeve blank section, the core temperature is above 1050℃; the surface temperature is 750℃, and the surface temperature needs to be increased by 300℃.

6) Maximum bending requirement of billet: Maximum bending amount is 5mm/m, head≤40mm, body<50mm

7) Temperature accuracy: ±10℃

The billet induction heating equipment is controlled by an intermediate frequency power supply:

1. Full digital control: high control precision and high reliability

2. The voltage and current double closed-loop control system ensures the stability and reliability of the system.

3. Complete protection system: high protection such as overvoltage, overcurrent, lack of phase, water pressure, water temperature, etc., to ensure that parts are not damaged when the equipment fails.

4. High power factor operation characteristics: The efficiency and power factor of the whole set of billet induction heating furnace reach a higher value.

5. The advanced temperature closed-loop control can control and adjust the heating temperature to ensure that the billet is heated evenly.

6. The high frequency start performance of the intermediate frequency power supply completely eliminates the start failure.

7. It can be adjusted automatically according to different frequencies and loads.