How to operate correctly and reasonably to extend the service life of ഉയർന്ന താപനിലയുള്ള വൈദ്യുത ചൂള?

1. Under normal circumstances, before operating the high-temperature electric furnace and intermediate frequency furnace, check whether the water flow of the water cooling system is unobstructed, whether the cooling water pressure and temperature are normal, whether there is water leakage, and whether the hydraulic system can work normally.

2.When operating the high-temperature electric furnace, be careful not to touch it randomly, operate by one person, and supervise by one person, and it is strictly forbidden to enter the machine room to prevent electric shock. During the smelting process, dry melt should be used, and the material should be discharged lightly and frequently added. When the melt in the furnace is melted to meet the needs, it should be poured out in time to avoid high temperature and increase the loss of the furnace lining;

3. Observe frequently. When you find that there is redness on the outside of the furnace body of the high-temperature electric furnace, this is a precursor to the furnace leakage. Measures such as shutting down the intermediate frequency power supply and pouring the molten material in the furnace should be taken in time to avoid the occurrence of furnace leakage accidents.

4. It should also be noted during use that when it is found that the furnace lining becomes very thin and cannot be used continuously, the old furnace lining should be smashed and replaced with a new one to prevent the occurrence of furnace leakage accidents.