Daily maintenance method of high frequency hardening machine

High-frequency hardening machine is a new type of heating equipment with a high unit power per square meter, which can effectively increase the depth of the hot layer and short-term heat penetration in the blank. When the high-frequency hardening machine is in use, it should be used regularly. Maintain it.

1. Regular inspection device: Regularly check the contact between the screws and fasteners of each part of the high-frequency hardening machine. If loosening is found, it should be modified and replaced in time to avoid serious consequences.

2. Controleer regelmatig of de bedrading in goede staat is: controleer zorgvuldig de contacttoestand van de inductiespoel van de hoogfrequente hardingsmachine. Als er een oxidehuid is, moet deze op tijd worden schoongemaakt en moeten de scheuren op tijd worden vervangen. Als er problemen worden gevonden, moet de hoogfrequente hardingsmachine op tijd worden gerepareerd.

3. Clean the dirt on the power cabinet: after a period of use, dust will adhere to the surface of the element, so it must be cleaned in time to prevent the failure of the high-frequency quenching machine.

4. Regularly check the water pipe head: Due to the different water quality used in various regions, check whether the internal equipment of the high-frequency quenching machine pipe head is dirty. If it is not cleaned for a long time, it will affect the cooling effect and also affect the service time of the water pipe. The phenomenon of aging will occur.