Matters needing attention during the knotting process of induction furnace (ramming material)

The whole process of induction furnace (ramming material) has many steps, and the knotting is some of the more important processes. And the knotting process can also affect the service life of the furnace.

What should you pay attention to during the knotting process of the lining material (ramming material) to ensure that it does not affect the service life of the furnace?

1. Standardize the standard operation process, but in addition, there are many precautions in the knotting process of the ramming material.

For example, to ensure that the power supply and water supply system are perfect before knotting, it is also necessary to pass the staff on each project in advance to make preparations in advance. Of course, it also includes that staff are not allowed to bring flammable and explosive materials into the work site, including some items such as mobile phones and keys.

2. Adding sand in the process of adding the induction furnace (ramming material) is a relatively strict process. For example, the sand must be added at one time. Do not add it in batches. Of course, when adding sand, make sure that the sand is spread evenly. The bottom of the furnace cannot be piled up in a pile, otherwise it will cause the particle size of the sand to separate.

3. Induction furnace (ramming material) is specially reminded: When knotting, it must be operated in the manner of shaking first and then vibrating. And pay attention to the technique, to ensure that the operation process should be light first and then heavier. And the joystick must be inserted to the bottom once, and every time the stick is inserted, it must be shaken eight to ten times.

4. After the stove bottom is finished, be sure to put it in the dry pot steadily. Only in this way can it be ensured that the forming is relatively standard, and it will generally be a standard annular triangle ring. Of course, there are many steps that need to be paid attention to throughout the knotting process. And every step cannot be ignored.

The above is what the Induction Furnace Technology Department shares for you: The shared induction furnace (ramming material) is precautions during the knotting process. If you want to know more information about the lining material, please follow us!