What are the specific configurations of the Ф70×240 mm round steel induction heating furnace?

A. لاءِ ٽيڪنيڪل گهرجون round steel حرڪت واري حرڪت واري فرنس

Round steel: Ф70-80×240 overall heating, one piece in 32 seconds.

Heating temperature: 1200℃

Requirements: The equipment power is designed according to 400KW, frequency fo=750HZ, f=1000HZ, 3 compensation capacitors are actually used, flat pressure connection (0.75-1000-1S)

B. Specific configuration of round steel induction heating furnace

1. Dimensions: length*width*height=2300*500*560.

2. Inductor parameters: Φ135×2250×66 turns, square copper tube 24×16×2.5 flat winding (effective pad surface 24mm), the first group at the feed end has 10 turns, and the remaining 7 groups have 8 turns, 8 A total of 66 turns are connected in series, the theoretical gap is 9.7mm, the knotting material is CA340 model, and the furnace lining hole is Φ105.

3. The guide rails are made of Ф14*2 stainless steel pipes, two-way water-cooled.

4. Winding core mold: Φ135 *450 one piece

5. Knotting mold: Φ105 *2500 one piece

What are the specific configurations of the Ф90×280 mm round steel induction heating furnace?

A. لاءِ ٽيڪنيڪل گهرجون round steel induction heating furnace

Round steel: Ф90×280mm overall heating, one piece in 60 seconds.

Heating temperature: 1200℃

Requirements: The equipment power is designed according to 400KW, the frequency fo=500HZ, f=800HZ, the compensation capacitor is actually connected with 3 pieces of flat pressure (0.75-1000-1S)

B. Specific configuration of round steel induction heating furnace

1. Dimensions: length*width*height=2300*500*560.

2. Inductor parameters: Φ165×2250×72 turns, square copper tube 24×16×2.5 flat winding (effective pad surface 24mm), 8 turns in one set, 9 sets in series, a total of 72 turns, theoretical gap 6.9mm, knotted The material is CA340 model, and the furnace lining hole is Φ135.

3. The guide rails are made of Ф16*2 stainless steel pipes, two-way water-cooled.

4. Winding core mold: Φ165 *450 one piece

5. Knotting mold: Φ135 *2500 one piece

What are the specific configurations of the Ф65×320 mm round steel induction heating furnace?

A. لاءِ ٽيڪنيڪل گهرجون round steel حرڪت واري حرڪت واري فرنس

Round steel: Ф65-80×320, heating at the end of 7 holes, one piece in 43 seconds.

Heating temperature: 1200℃

Requirements: The equipment power is designed according to 400KW, the frequency fo=750HZ, f=1000HZ, the compensation capacitor is actually connected with 3 pieces of flat pressure (0.75-1000-1S)

B. Specific configuration of round steel induction heating furnace

1. Dimensions: length*width*height=1900*450*560.

2. Inductor parameters: Φ130*370*11 turns per hole, square copper tube 24*16*2.5 flat winding (effective heating surface 24), a set of 11 turns, theoretical gap 7.45mm, furnace lining is carbonized with Φ125*Φ105*450 Silicon tube with 7 holes in total.

3. Winding core mold: Φ130 *450 one piece

What are the specific configurations of the Ф95×320mm round steel induction heating furnace?

1. Technical requirements for round steel حرڪت واري حرڪت واري فرنس
2. Round steel: Ф95-105×320, heating at the end of 7 holes, one piece in 72 seconds.

Heating temperature: 1200℃

Requirements: The equipment power is designed according to 400KW, the frequency fo=600HZ, f=800HZ, the compensation capacitor is actually connected by 3 pieces of flat pressure (0.75-1000-1S)

B. Specific configuration of round steel induction heating furnace

1. Dimensions: length*width*height=1900*420*560.

2. Inductor parameters: Φ150*370*11 turns per hole, square copper tube 24*16*2.5 flat winding (effective heating surface 24), a set of 11 turns, theoretical gap 7.45mm, furnace lining is carbonized with Φ145*Φ125*450 Silicon tube with 7 holes in total.

3. Winding core mold: Φ150 *450 one piece