Principle of Mechanical Mechanism of Steel Tube Induction Heating Furnace

Feeding bench for steel tube induction heating furnace

The loading platform is a stack of steel pipes to be heated. The platform is welded with 16mm thick steel plate and 20 hot-rolled I-beam. The width of the platform is 200 mm. The uprights are connected by bolts. When working, the crane can hoist the whole bale onto the bench, the bulk bale device feeds, the bulk bale device is driven by an oil cylinder, and the driving device is placed in the middle of the bench as much as possible. There are 7 feeders, and the heated steel pipe will One by one, it automatically rolls to the end of the stand. The end is equipped with a material collecting and positioning seat. Due to the large difference in the diameter of the steel pipe, the material collecting and positioning seat can be adjusted according to the diameter of the steel pipe.

Feeding translation mechanism for steel tube induction heating furnace

The hydraulic drive of the feed translation mechanism adopts synchronous valves. There are 6 sets of support mechanisms and 6 sets of metallurgical cylinders with a diameter of ф50 and a stroke of 250mm. There are 2 sets of translation cylinders with a diameter of φ80 and a stroke of 900mm. Translation into place, exactly at the center of the double rollers. There are 4 wheel sets under each set of supporting mechanism, and the lower supports of the wheel sets are two 15# light rails, which are accurate, labor-saving, practical and reliable.