Induction melting furnace for refining metal silicon from silicon mud

The metal silicon powder produced by silicon wafer manufacturers in the solar photovoltaic industry is dried and directly melted in the furnace after pretreatment. The melting cost is low, the consumables are few, no graphite crucible is needed, and the furnace lining has a long life and can be used continuously. Compared with the traditional electric furnace, the smelting cost can be saved by more than 40%.

Integrating the characteristics of metallic silicon, our company has developed a new type of special furnace for refining metallic silicon from silicon mud on the basis of a large number of experiments. It can directly smelt silicon mud with almost no loss. The yield rate is over 90%, and the product exceeds 2202.

The induction melting furnace for refining metal silicon from silicon mud is mainly composed of four parts:

1. Simba rekugovera uye chikamu chemagetsi: yakafanana inverter yepakati frequency magetsi magetsi kana akateedzana inverter epakati frequency frequency magetsi

2. Chivira chemuviri chikamu: aluminium goko kana simbi goko, simbi yeganda remoto inoumbwa neiyo ganda ganda, yakagadzika furemu, chivharo chevira, chirairi inodzora mashandiro, induction coil, magnetic joko, nezvimwe, uye chirafu leakage alarm mudziyo.

3. Chigadzirwa chekutumira: mechiniki yekudzora kana hydraulic mudziyo, nezvimwe.

4. Mvura inotonhorera system: yakavharwa chiuno kutonhora shongwe