Spring heating furnace

A. Zvinodiwa zve spring heating furnace:

1. Kupisa zvinhu zvechitubu chekupisa moto: chitubu chesimbi, 60Si2Mn, 60Si2GrVa, nezvimwewo.

2. Tsanangudzo yetsvimbo yekudziya: dhayamita Φ10-Φ40mm, kureba 4–6m

3. Kupisa tembiricha: 950-1050 ℃

4. Kupisa kwekushisa: Φ30 × 6m kupisa kusvika 1050 ℃, kupisa nguva isingasviki makumi matanhatu

5. Iko kupisa kwekugadzirisa simba rekukuya: 100Kw

B. Kuumbwa kwechoto chekudziya kwechirimo:

Chitubu chekudziisa choto chine yekuchengetera otomatiki inoshandura feeder, choto chekutakura, boka rekudziisa sensor, boka reuniform tembiricha sensor, vira rekuchengetedza kupisa, muchina wekukurumidza kubuda, yepakati frequency magetsi, yepakati frequency compensation capacitor cabinet. , control panel, uye tester. Tembiricha sisitimu, HSBL mhando yekutonhodza shongwe, etc. The conveying roller tafura inotora frequency conversion yekumhanyisa regulation, uye kumhanya kunochinjika zvisingaite, izvo zvinogona kuchinjika kune akasiyana kudyisa kumhanya kweakasiyana zvirevo zvema blanks.

C. Nhanganyaya yematsutso ekudziya kwechoto maitiro:

The spring heating furnace is used to heat the spring blank (bar stock) before coiling the spring, and the heating method is medium frequency induction heating. The spring heating furnace adopts segmented through heating, that is, the billet is fed at one end of the billet, and after the temperature rise, the uniform temperature sensor, and the holding resistance furnace, it reaches the set temperature and holding time, and then is sent to the spring winding machine through the rapid discharge mechanism Perform winding. The applicable spring blank diameter range is Φ10-Φ40, and the length range is 4-6 meters.