- 08
- Feb
What spare parts are used for 8T induction melting furnace?
What spare parts are used for 8T induction melting furnace?
KGPS-5000KW
1. Furnace body part:
1. 1 set of induction coil
Specification: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.
Inner diameter: 1280MM total height: 2070mm copper tube specifications: 65X35X4
9X2=18 turns of live wire height: 1500mm turn pitch: 20mm
Upper stainless steel pipe ∮35X3=2 turns Lower stainless steel pipe ∮35X3=4 turns
Column rod length 2070X width 60X thickness 50 10 equal parts
2. Magnetic yoke (2 cooling pipes) 4
Specification: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.
Appearance: 2070X240X120 Silicon steel sheet size: 1970X110X176
3. 2 sets of upper and lower short-circuit rings of the furnace body
Specification: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.
Upper short-circuit ring: outer diameter: ∮1950mm, 2 nozzles ∮12; copper tube 20X25X3
Lower short-circuit ring: outer diameter: ∮1600mm; inner diameter: ∮1260; thickness 4mm copper plate
4. 2 furnace rotary joints
Specification: DN150
5. Joint bearing 2 pcs
Specification: GEG100ES
6. 2 water-cooled cables
Specifications: Wire diameter: 980mm2 Length: 5.5mm One end is extra large triangular head, the other end is M76 nut cap, inner diameter of rubber tube: 76mm.
7. 4 copper washers for water-cooled cables
Specifications: Red copper ring: outer diameter 63mm, inner diameter: 58mm, thickness: 2mm.
Brass ring: outer diameter 75mm, inner diameter: 55mm, thickness: 10mm.
Brass ring: outer diameter 75mm, inner diameter: 64mm, thickness: 9mm.