What spare parts are used for 8T induction melting furnace?

KGPS-5000KW

1. Furnace body part:

1. 1 set of induction coil

Specification: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.

Inner diameter: 1280MM total height: 2070mm copper tube specifications: 65X35X4

9X2=18 turns of live wire height: 1500mm turn pitch: 20mm

Upper stainless steel pipe ∮35X3=2 turns Lower stainless steel pipe ∮35X3=4 turns

Column rod length 2070X width 60X thickness 50 10 equal parts

2. Magnetic yoke (2 cooling pipes) 4

Specification: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.

Appearance: 2070X240X120 Silicon steel sheet size: 1970X110X176

3. 2 sets of upper and lower short-circuit rings of the furnace body

Specification: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.

Upper short-circuit ring: outer diameter: ∮1950mm, 2 nozzles ∮12; copper tube 20X25X3

Lower short-circuit ring: outer diameter: ∮1600mm; inner diameter: ∮1260; thickness 4mm copper plate

4. 2 furnace rotary joints

Specification: DN150

5. Joint bearing 2 pcs

Specification: GEG100ES

6. 2 water-cooled cables

Specifications: Wire diameter: 980mm2 Length: 5.5mm One end is extra large triangular head, the other end is M76 nut cap, inner diameter of rubber tube: 76mm.

7. 4 copper washers for water-cooled cables

Specifications: Red copper ring: outer diameter 63mm, inner diameter: 58mm, thickness: 2mm.

Brass ring: outer diameter 75mm, inner diameter: 55mm, thickness: 10mm.

Brass ring: outer diameter 75mm, inner diameter: 64mm, thickness: 9mm.