Pay attention to these five points when buying плоча од лискуна

1. See if there are obvious defects on the surface of the mica board

The surface of the mica board should be smooth and clean, free of burrs and slicing knife marks, no glue penetration and surface pollution (such as partial blackening, yellowing), and try to choose the mica board surface to be free of cracks, cracks, no knots, For sandwiches, resin capsules and gum lanes, the natural warpage of the whole board should be as small as possible to avoid sand penetration caused by improper sanding process operation.

2. recognize the difference between veneer veneer and natural wood veneer veneer mica board

The texture of the mica board of the former is basically straight, and the texture pattern is regular; the mica board of the latter is a natural wood pattern, and the natural variability of the texture pattern is relatively large and irregular.

3. Appearance inspection of mica board

The appearance of the mica board should have a good aesthetic feeling, the material should be meticulous and uniform, the color and luster should be clear, and the wood grain should be beautiful.

4.the structure of the glue layer of the mica board is stable, and there is no phenomenon of glue opening

It should be noted that there should be no bulging or delamination between the veneer on the surface of the mica board and the substrate, and between the inner layers of the substrate.

5. choose mica board with low formaldehyde emission

Don’t choose decorative mica board with pungent smell. Because the higher the smell of mica board, the higher the formaldehyde emission, the more serious the pollution and the greater the harm.