How to add cooling water to the chiller?

1. Find out and deal with it in time. The company’s personnel responsible for the operation and management of the ice water machine must be able to detect and deal with the lack of cooling water in the ice water machine in time.

2. The amount of water replenishment should also be controlled, not as much as possible! Losses such as evaporation, dripping, and floating water. The amount of replenishment should be based on the total amount of evaporation, dripping, and floating water. If it cannot be made up Cooling water may cause the chiller to fail to dissipate heat normally, and if it is added too much, it will also cause problems.

3. The amount of water supplement can not be completely fixed, it should be decided according to the cooling effect of the machine.

Some people think that there is a calculation formula for the amount of supplemental water, which is incorrect. The amount of supplemental water can be calculated, but it is not absolute. Take the evaporation loss as an example. Water distribution range, water flow speed, circulation speed, water pump, environmental air volume, etc. are related, but it is really difficult to calculate in practice.

It is not recommended to fix the amount of water supplemented by a formula. It is recommended to determine it according to the cooling effect of the ice water machine. The cooling effect is normal if it will not be overfilled and will not be too short of water.