Matters needing attention in induction furnace building

The ramming process of induction furnace building is a relatively complicated process, and the knotting process is a very important link, which can affect the service life of the furnace. So, what should we pay attention to in the process of knotting to ensure that the service life of the furnace is not affected?

1. Of course, the basic is the standard operation process, but in addition, there are many precautions in the knotting process of the induction furnace ramming material. For example, to ensure that the power supply and water supply system are perfect before knotting, it is also necessary to pass the staff on each project in advance to make preparations in advance. Of course, it also includes that the staff are not allowed to carry any combustibles to the work site, of course, it also includes some items such as mobile phones and keys.

2. The process of adding sand to the ramming material of the induction furnace is a more stringent process. For example, the sand should be added at one time. Do not add it in batches. Of course, when adding sand, make sure that the sand is flat on the bottom of the furnace. Pile in a pile, otherwise it will cause the particle size of the sand to separate.

3. When tying the knot, I have to shake it first and then shake it. And pay attention to the technique, to ensure that the operation process should be light first and then heavier. In addition, the joystick must be inserted to the bottom once, and the joystick must be shaken eight to ten times each time it is inserted.

4. After finishing the bottom of the stove, make sure that it can be put into the dry pot steadily. Only in this way can it be ensured that the forming is relatively standard, and it will generally be a standard annular triangle ring. Of course, there are many steps that need to be paid attention to throughout the knotting process. And every step cannot be ignored.