钢坯连轧加热设备

我們制作的钢坯热轧加热设备节能10% -30%，更可靠。到目前為止，得到了台湾和越南客户的良妽反。

钢坯连轧加热设备采用串联谐振控制电源其特点:

1.

2, DSP控制，快速捕捉锁相启动，满足频繁启停，成功率高.

3.

4.

5, 转数字化整定

6、电源单机功率50-6000KW，频率200-10000Hz.

钢坯连轧加热设备特点:

1、加热速度快，氧化脱碳少。

2、输入输出辊道采用304不锈钢材质，耐腐蚀，使用寿命长。

3.

4.

5、由双色美国雷泰测温仪闭环控温，实时显示当前钢坯温度，加热更均匀.

I-billet eqhubekayo yokufudumeza izixhobo zokufudumeza

Izixhobo zokufudumeza ezishushu ze-billet esizenzileyo zinokugcina amandla nge-10% -30% kwaye zithembeke ngakumbi. Ukuza kuthi ga ngoku, sifumene ingxelo entle evela kubathengi baseTaiwan naseVietnam.

I-billet eqhubekayo yokufudumeza isixhobo ithatha uthotho lolawulo lonikezelo lwamandla. Iimpawu zayo:

1. I-slab eqhubekayo yokufudumeza izixhobo zenzelwe i-resonance parallel, ukutshintshwa kwesigaba kunye nokulungiswa kwamandla, kwaye izixhobo zikhulile kwaye zizinzile; ineenzuzo ezininzi kuluhlu lwamandla aphezulu ngaphezulu kwe-3000KW.

2. Ulawulo lwe-DSP, ukuqala kwesigaba sokuvala ngokukhawuleza, ukuhlangabezana nokuqala rhoqo kunye nokuyeka, izinga eliphezulu lempumelelo.

3. Ukuguqulwa kwamaxesha amaninzi kunye nokulungiswa komthwalo, uluhlu lwe-frequency adaptation range 200-10000Hz, ukulinganisa ngokuzenzekelayo ukutshintshwa kwesithando somlilo, akukho lungelelwaniso lwezandla olufunekayo.

4. I-T2 imivalo yethusi ebomvu isetyenziswe kwikhabhinethi, ekhutshwe ngesanti kunye ne-passivated; i-low leak inductance, i-anti-oxidation, kunye nokunciphisa ngokufanelekileyo ilahleko yomgca.

5. Ukulawulwa okupheleleyo kwesikrini se-steel rolling kunye ne-billet yokufudumeza isithando somlilo, ukulungiswa kwedijithali okucocekileyo, iirekhodi zenkqubo epheleleyo kunye neemvume zenqanaba elingqongqo. Iiparamitha eziphambili zinokubuyiselwa kwizicwangciso zefektri ngeqhosha elinye.

6. Amandla ombane omnye ngu-50-6000KW, kwaye i-frequency yi-200-10000Hz.

Iimpawu ze-billet eziqhubekayo zokufudumeza izixhobo zokufudumeza:

1. Isantya sokufudumeza ngokukhawuleza, i-oxidation encinci kunye ne-decarburization.

2. Igalelo kunye ne-output rollers zenziwe nge-304 yensimbi engenasici, echasene ne-corrosion kwaye inobomi obude benkonzo.

3. I-billet yensimbi eqhubekayo yokuvelisa imveliso ithatha inkqubo yokulawula i-PLC edibeneyo kunye ne-man-machine interface, kunye neeparitha eziguquguqukayo zedijithali ngokupheleleyo.

4. I-billet eqhubekayo yokuguqa I-billet eqhubekayo yokufudumala i-furnace ixhotywe ngomsebenzi wokunciphisa isitshixo esisodwa, kunye nokusebenza kakuhle kwemveliso kuphezulu.

5. Ukulawulwa kweqondo lokushisa elivaliweyo ngemibala emibini ye-American Leitai thermometer, umboniso wexesha langempela lobushushu be-billet yangoku, ukufudumeza ngokulinganayo.