Isisombululo sokuvuza kwamanzi kwi-Induction Heating Furnace Coil

1. Ukulungiswa kwezinto kunye neemfuno:

① Iglu eyomeleleyo ye-AB, ifuna ukuxhathisa ubushushu be-120℃, i-25℃ yobushushu bokunyanga okokuqala kwi-5 ~ 10 imizuzu, kunye namandla aphezulu kwiiyure ezingama-24.

② I-1755 i-surfactant isetyenziselwa ukucoca indawo evuzayo yenzwa, ukuze kuthintelwe ukuvuza ngeglue ephezulu ethembekileyo, ukuba akunjalo, ungayisebenzisa.

③ I-bakelite yoMbane, ubukhulu bufuneka ukuba bube yi-1 ~ 1.5mm ngqindilili kunokujika-ukujika kwe-inductor.

④ Umoya oxinanisiweyo kufuneka ubekhona kwindawo yokusebenza. Ukuba akunjalo, i-soot blower nayo ingasetyenziswa.

⑤ Lungiselela i-wedge yokhuni ukwandisa umgama phakathi kokuvuza kwe-sensor ijika nge-2 ~ 3mm.

2. Umsebenzi wokulungisa:

① Okokuqala, qinisekisa indawo ethile yokuvuza kwamanzi phakathi kojiko. Intsimbi enyibilikisiweyo ekwiziko idluliselwa kwiziko elilindileyo ukuze iqhubeke inyibilika. I-sensor ephukileyo iyanciphisa ukuhamba okupholileyo malunga ne-1/5 yokuhamba okuqhelekileyo kwaye iyaqhubeka idlula amanzi kwi-1 ukuya kwiiyure ze-2. Ukuba akukho sithando somlilo, gcina umthamo oqhelekileyo wokupholisa iiyure ezingama-2 ~ 3 ukuqala ukulungisa.

② Qinisekisa ubungakanani bomngxuma (ubukhulu becala lomngxuma ngaphezu kwe-2cm, kungcono ukukrazula inzwa, kwaye andizange ndifake umngxuma ongaphezulu kwe-2cm), kwaye uqinisekise ukuba amacala angaphezulu nangaphantsi ingene.

③ Yabona i-bakelite yombane kwiibhloko ngokobubanzi be-sensor, ubude buyi-1 ~ 2cm ubude kunobukhulu bomngxuma, kwaye ubukhulu bufana nobukhulu be-sensor emva kokutshata.

④ Emva kokuba inzwa ipholile kwi-1 ukuya kwiiyure ze-2, susa ukungena kwamanzi kunye nokuphuma kwenzwa, kwaye uvuthele umoya kwi-sensor de kungabikho mphunga wamanzi ekuvuzeni.

⑤ Phatha indawo evuzayo nge-1755 surfactant, yenza iglue ye-AB eyomeleleyo kumlinganiselo we-1: 1, yeka inzwa yokuvuthela, sebenzisa iglue ye-AB kwindawo evuzayo, ubukhulu buyi-1 ~ 2mm, kwaye indawo ingaphezulu kwe-1 kune-2. Idayamitha yangaphandle yokuvuza. ~ XNUMXCm, sebenzisa iglue ye-AB kumacala omabini angaphezulu nangaphantsi okujika.

⑥ Faka iglu ye-AB ngokulinganayo kumacala omabini e-bakelite yombane elungiselelwe kwangaphambili, ubukhulu bumalunga ne-1 ~ 2mm, faka indawo evuzayo, susa ngokukhawuleza umphetho weplanga, vumela isivamvo sijike sicinezele i-bakelite ngokwemvelo, ukuphuphuma kweglue ye-AB. ujikeleze kakuhle.

⑦ Lindela i-5 ~ 10 imizuzu (ixesha lokulinda lokunyanga lihluka ngokuxhomekeke kwiqondo lokushisa lenzwa), kwaye uqaphele ukuba i-AB glue kwibhodi yokulungiswa kweglue ijika ibe mhlophe kwaye ilukhuni, kwaye ke uvavanyo loxinzelelo lwamanzi lunokwenziwa. Ukuba akukho kuvuza, isithando somlilo sinokusebenza.