SD-35/45 Ixesha eliPhakathi eliQhelekileyo lokuQala uMlilo

Izinto eziphambili:

(1) SD-35/45 intermediate frequency power supply

(2) Isibonelelo sembuyekezo kunye nokwenza itheyibhile yeziko

(3) Ikhoyili yokungenisa, isikhokelo sikaloliwe kunye nesembozo esingaphandle

(4) indlela yokondla umoya

2. Maximum input power: 35KW/45KW

3. Oscillation frequency: 1-20KHZ

4. Igalelo ombane: ezintathu-zigaba 380V 50 okanye 60HZ

5. Ixesha lokulayisha: 100%

6. Iimfuno zamanzi okupholisa: ≥0.2MPa, ≥10L / min

7. Ubushushu (KG / min)

(1) Steel to 1000℃: 1.25KG/1.67KG

(2) Copper to 700℃: 1.75KG/2.33KG

8. Ubungakanani betafile: 1.2 yeemitha ubude x 0.6 yeemitha ububanzi x 0.68 yeemitha ukuphakama

9. Weight of forging furnace: 123KG/135KG

10. Isetyenziselwa ukufudumeza okuqhubekayo kwezinto ze-monolithic ezinje ngentsimbi, ubhedu, ialuminiyam, njl.

Isicelo esiqhelekileyo:

Kubandakanywa ukunikezelwa kwamandla okuphakathi, ibhokisi lembuyekezo kunye nebhentshi yomsebenzi, i-coil ye-induction, indlela yokutya, njl.

Iimpawu zesithando sokufudumeza esisezantsi sombane:

(1) Uluhlu lwamaxesha likhulu, ukusuka kwi-1KHZ ukuya kwi-20KHZ, kwaye isantya esifanelekileyo sinokukhethwa ngokobubanzi besixhobo sokufudumeza esithile.

(2) Xa yonke into ifudunyezwa kwiziko eliphakathi elibumba iziko, ubude bekhoyili yoqheliso yi-500mm-1 yemitha ubude, kwaye izinto ezininzi ziyatshiswa ngaxeshanye, eziqinisekisa umphumo wokuhambisa ubushushu;

(3) Isithando sokufudumeza sobushushu obuphakathi rhoqo sisebenzisa imo yokufudumeza eqhubekayo, kwaye umthwalo ngaphakathi kwekhoyili yoqheliso ulungelelene, owoyisa izixhobo ezibangelwe lutshintsho olukhulu lomthwalo xa umthwalo webha enye unyuka ukusuka kubushushu begumbi ukuya kwi-1100 ° C Ngexesha lonke lokufudumeza. Utshintsho olukhulu kumandla afudumeleyo okuqinisekisa ukuba amandla esona sixhobo angaphezulu kwe-85% yamandla alinganisiweyo kuyo yonke inkqubo yokufudumeza eqhubekayo, kwaye izixhobo zinokusetyenziswa ngokufanelekileyo.

(4) Xa kufudunyezwa isinyithi esingena-ferrous esifana nobhedu kunye nealuminium, esona sixhobo sinokuba ngaphezulu kwe-85% yamandla ubuninzi kuyilo olufanelekileyo lwekhoyili yoqheliso kunye ne-capacitor, kunye nobushushu be-3.5KG / KW • iyure xa kufudunyezwa ubhedu.

(5) Xa kuthelekiswa nombane wamandla ombane we-thyristor, ayisiyincinci kuphela ngobukhulu kwaye ilungile ukuyigcina, kodwa inokugcina amandla nge-15-20%.

Iinkcukacha eziphambili zokufudumeza i-monolithic kunye nokufudumeza amandla: