What needs to be cleaned up during the use of the ice water machine?

The first one is the condenser.

The first thing to bear the brunt is the condenser, because the condenser is one of the several large parts of the ice water machine, and it is also the most important and important part of the ice water machine. Therefore, cleaning the condenser is a must to do.

The second one is the evaporator.

The materials of the evaporator and the condenser are similar to a certain degree. Although the operating principles of the two are different, they are both heat exchange devices from a large point of view. The difference is that the condenser is heat exchange, and the evaporator is cold and heat exchange. The evaporator, like the condenser, may also encounter the problem of pipe blockage. The refrigerant in the evaporator tube and the chilled water outside the tube may affect the evaporator. Therefore, regular cleaning and Clean.

The third one is air-cooled and water-cooled systems.

Air-cooling and water-cooling systems are the heat dissipation and cooling system of the chiller, and are also the most important part of the chiller, so they should be treated seriously. The cleaning and cleaning of air-cooled and water-cooled systems should be determined according to different actual conditions. Water-cooled and air-cooled systems are different, either cleaning or descaling.

The fourth one is the filter drier and so on.

Drying and filtration are indispensable to ensure that the refrigerant can circulate in the ice water machine normally. After all, if the water content and moisture of the refrigerant are too high, it will not operate normally, and if the refrigerant is not filtered, the ice water machine will also Because of the increase of impurities in the refrigerant (the content of impurities and foreign matter in the refrigerant will definitely be higher and higher in the continuous cycle operation), the ice water machine cannot operate normally.