### Talking about several important temperature values ​​of chillers

Talking about several important temperature values ​​of chillers

First, the chilled water outlet temperature.

The water outlet temperature is a special term for the ice water machine, which refers to the temperature of the refrigerant when the refrigerant is transported to the target after the refrigerant is carried by the cooling capacity in the ice water machine system.

The outlet temperature of the chilled water is equal to the cooling effect. The outlet temperature of the chilled water can often be set. When setting the outlet temperature of the chilled water, it should be set according to the actual load capacity of the chiller compressor. It is not recommended. Set the minimum chiller outlet water temperature to avoid high-load compressor operation.

The second is the condensation and evaporation temperature.

These two temperature values are often mentioned temperature values. Of course, the condensation temperature of the ice water machine is the temperature at which the refrigerant gas can be condensed into a liquid. The condensation process is very important, so the condensation temperature is also very important. The condensing temperature determines the condensing pressure and the subsequent evaporating temperature and evaporating pressure, which is extremely important to the cooling effect of the entire system!

The third is the intake and exhaust temperature.

The suction and discharge temperature refers to the suction and discharge temperature of the compressor. The compressor is the most important core component of the refrigerator. The suction and discharge temperatures are also called the suction and discharge temperature.

For the suction and discharge temperature, what is the appropriate value? It should be carried out according to different compressors and different operating states. Let’s talk about it separately below!

First of all, the suction temperature, because the suction operation is immediately after the evaporation, the suction temperature should not have too much temperature difference compared with the evaporation temperature. Generally, the maximum suction temperature is about 8 degrees Celsius higher than the evaporation temperature. , otherwise it may cause problems due to excessive temperature difference!

Secondly, the exhaust temperature of the ice water machine, no doubt, the exhaust temperature will of course be determined according to the compression of the compressor, but one thing is certain, that is, the exhaust temperature is proportional to the suction temperature!