Energy saving method of intermediate frequency induction furnace 2

1. When the medium frequency induction furnace is used for casting and smelting heating, the operators are required to be diligent, to continuously add materials and assist in stirring steel, so as to improve the smelting speed and save power consumption. Also remember to accurately control the temperature of molten iron, and do not let the temperature of the intermediate frequency induction furnace be too high or locally too high, which is not good for power consumption and furnace lining life. A good furnace worker can save electricity and be efficient.

2. Develop a good habit of using the medium frequency induction furnace, draw up the power as much as possible and reduce the heat preservation or baking time to adjust the utilization rate of the medium frequency induction furnace. When the power of the intermediate frequency induction furnace is not full, the power factor is low and the loss is large.

3. The oven of the intermediate frequency induction furnace is a scientific oven. When drying the oven, the cooling water of the induction coil should be turned off (one third of the normal water volume is sufficient). . Some furnace workers do not pay attention to this, and use normal water supply. As a result, the discharged water vapor condenses into water and flows back when it meets the cold copper pipe, so the oven takes a long time, consumes electricity, and the effect is not good.

4. The technical content of the intermediate frequency induction furnace is not determined by the manufacturers. Although the technology of the intermediate frequency induction furnace is relatively mature, each company still has its own advantages. Therefore, it is recommended that manufacturers try to choose a historical comparison when purchasing an intermediate frequency induction furnace. Manufacturers with long-term, better service and more complete technology to cooperate to ensure the energy saving of the medium frequency induction furnace.