Basic introduction of horizontal quenching machine

The horizontal quenching machine is mainly composed of discharge rollers, fixed brackets, etc., in which the tailstock and the headstock are driven by hydraulic cylinders of the same length and move up and down along the circular guide rails on two parallel planes.

When the next hot steel piece in the waiting position is resisted, the drum rotates again, and the steel piece falls on the conveyor, and the conveyor clearly lifts it to the liquid level and sends it to the next process. The induction switch used for heating by the horizontal quenching machine is formed by 8 reasonable circles in series, and the cooling water is reasonably set.

A heat exchanger is installed on the side of the horizontal quenching machine to reduce the temperature of the heat-treated material. The heat-treating substance is circulated between the heat-treating substance box and the heat exchanger according to the high-pressure water pump, and the heat-treating substance after cooling by the heat exchanger is sprayed out to the heated steel in the heat-treating substance box at a working pressure of 0.4MPa.