Ang oven furnace sa pagpainit sa billet

The billet induction pagpainit hudno adopts intermediate frequency series resonance power supply to control its characteristics:

● Parallel resonance design, phase shift power adjustment, the equipment is mature and stable; it has more advantages in the high power range above 3000KW.

● Pagkontrol sa DSP, paspas nga pagsugod sa yugto sa pag-lock sa pagsugod, pagtagbo sa kanunay nga pagsugod ug paghunong, taas nga rate sa kalampusan.

● Frequency conversion and load adaptation, frequency adaptation range 200-10000Hz, automatic matching for induction furnace replacement, no manual adjustment is required.

● T2 pula nga tumbaga tumbaga bar gigamit sa kabinete, nga sandblasted ug passivated; ubos nga leakage inductance, anti-oxidation, epektibo nga pagkunhod sa pagkawala sa linya.

● Full touch screen control, puro digital setting, kompleto nga rekord sa proseso ug higpit nga lebel sa awtoridad. Ang mga nag-unang mga parameter mahimong ibalik sa mga setting sa pabrika nga adunay usa ka yawe.

● Ang gahum sa usa ka suplay sa kuryente mao ang 50-6000KW, ug ang frequency mao ang 200-10000Hz.

The induction heating coil of the billet induction heating furnace is a profiling design. The copper tube is wound with T2 oxygen-free copper. The wall thickness of the copper tube is ≥2.5mm. The furnace body insulation material is made of knotted materials imported from the United States. It has high strength, high temperature resistance and longer service life. Long; the inlet and outlet ends of the furnace body of the steel billet secondary heating equipment are encapsulated with 5mm red copper plates, which greatly reduces the magnetic flux leakage and prolongs the service life. The furnace body chassis frame is made of non-magnetic stainless steel or aluminum alloy to reduce the influence of magnetic leakage and heat generation on other devices. The square steel billet induction heating furnace is equipped with a water-cooled roller between every two furnace bodies, and each roller is equipped with a variable frequency speed regulating motor to ensure the stable and uniform speed of the billet.

The billet is driven by the motor and the idler to run in the induction heater at a uniform speed. The billet is heated at a uniform temperature with less heat loss and high heating efficiency. The American Leitai thermometer is equipped at the discharge port to display the heating temperature of the billet in real time to maintain the workpiece The uniformity. The billet heating furnace has a higher degree of automation than ordinary equipment, and is convenient to operate and easy to connect with other equipment and has a high degree of intelligence. The billet induction heating furnace heats evenly, the billet after heat treatment has no cracks, no over-burning, and no straightening machine for straightening. The tensile strength and toughness can meet customer needs.

Operating conditions of billet induction heating furnace and user-supplied parts:

1. The user provides power supply on the high-voltage side of the transformer, electrical connection lines from the transformer to the low-voltage power distribution cabinet and power cabinet, and the operation console enters the line.

2. Kahitas-an: ≤2000m; Paryente nga kaumog: ≤90%

3. Equipment cooling: The total flow of the whole set of equipment is greater than or equal to 200 cubic meters per hour. Pressure≥0.3MPa

4. No conductive dust and corrosive gas.

Billet induction heating furnace price