બિલેટ ઇન્ડક્શન હીટિંગ ભઠ્ઠી

The billet induction ગરમ ભઠ્ઠી adopts intermediate frequency series resonance power supply to control its characteristics:

● Parallel resonance design, phase shift power adjustment, the equipment is mature and stable; it has more advantages in the high power range above 3000KW.

● DSP કંટ્રોલ, ઝડપી કેપ્ચર ફેઝ લૉક સ્ટાર્ટ, વારંવાર સ્ટાર્ટ અને સ્ટોપને મળો, ઉચ્ચ સફળતા દર.

● Frequency conversion and load adaptation, frequency adaptation range 200-10000Hz, automatic matching for induction furnace replacement, no manual adjustment is required.

● T2 લાલ કોપર કોપર બારનો ઉપયોગ કેબિનેટમાં થાય છે, જે સેન્ડબ્લાસ્ટેડ અને પેસિવેટેડ હોય છે; ઓછી લિકેજ ઇન્ડક્ટન્સ, એન્ટી-ઓક્સિડેશન, અસરકારક રીતે લાઇન લોસ ઘટાડે છે.

● સંપૂર્ણ ટચ સ્ક્રીન નિયંત્રણ, શુદ્ધ ડિજિટલ સેટિંગ, સંપૂર્ણ પ્રક્રિયા રેકોર્ડ અને કડક સ્તરની સત્તા. મુખ્ય પરિમાણોને એક કી વડે ફેક્ટરી સેટિંગ્સમાં પુનઃસ્થાપિત કરી શકાય છે.

● એક વીજ પુરવઠાની શક્તિ 50-6000KW છે, અને આવર્તન 200-10000Hz છે.

The induction heating coil of the billet induction heating furnace is a profiling design. The copper tube is wound with T2 oxygen-free copper. The wall thickness of the copper tube is ≥2.5mm. The furnace body insulation material is made of knotted materials imported from the United States. It has high strength, high temperature resistance and longer service life. Long; the inlet and outlet ends of the furnace body of the steel billet secondary heating equipment are encapsulated with 5mm red copper plates, which greatly reduces the magnetic flux leakage and prolongs the service life. The furnace body chassis frame is made of non-magnetic stainless steel or aluminum alloy to reduce the influence of magnetic leakage and heat generation on other devices. The square steel billet induction heating furnace is equipped with a water-cooled roller between every two furnace bodies, and each roller is equipped with a variable frequency speed regulating motor to ensure the stable and uniform speed of the billet.

The billet is driven by the motor and the idler to run in the induction heater at a uniform speed. The billet is heated at a uniform temperature with less heat loss and high heating efficiency. The American Leitai thermometer is equipped at the discharge port to display the heating temperature of the billet in real time to maintain the workpiece The uniformity. The billet heating furnace has a higher degree of automation than ordinary equipment, and is convenient to operate and easy to connect with other equipment and has a high degree of intelligence. The billet induction heating furnace heats evenly, the billet after heat treatment has no cracks, no over-burning, and no straightening machine for straightening. The tensile strength and toughness can meet customer needs.

Operating conditions of billet induction heating furnace and user-supplied parts:

1. The user provides power supply on the high-voltage side of the transformer, electrical connection lines from the transformer to the low-voltage power distribution cabinet and power cabinet, and the operation console enters the line.

2. tંચાઈ: ≤2000 મી; સાપેક્ષ ભેજ: ≤90%

3. Equipment cooling: The total flow of the whole set of equipment is greater than or equal to 200 cubic meters per hour. Pressure≥0.3MPa

4. No conductive dust and corrosive gas.

Billet induction heating furnace price