Bar matsakaici mita shigarwa dumama makera

1 , bar material medium frequency shigowa dumama tanderu Amfani:

Wannan saiti na matsakaicin mita mashaya shigar da wutar makera galibi ana amfani dashi don dumama sanduna tare da diamita na 75 mm da tsawon 100-150 mm. Yanayin zafi na ƙarshe shine 1100 ° C. Bar abu matsakaici mita shigar da dumama murhu don tabbatar da dumama workpiece aiki tempo ya kai 10 seconds / yanki. Bambancin yanayin zafin ƙasa: ƙasa da 50 ° C

2, kayan mashaya tsaka -tsaki mitar shigar zaɓin murhun wuta

3, manyan alamun fasaha da halaye na mashaya matsakaicin shigar da wutar makera:

1. Thyristor tsaka -tsakin mitar wutar lantarki:

Ikon 1.1 shine 800KW, Mitar shine 1000Hz.

Yawan nasarar farawa 1.2 na iya kaiwa 100%

1.3 madaidaicin ƙarfin wutar lantarki ya fi ko daidai da 0.92

1.4 tare da ƙirar zazzabi don sarrafa madaidaicin madauki iko

1.5 tare da juyawa na ciki da na waje da juyawa ta atomatik

1.6 tsarin tashoshi da yawa na iya sauƙaƙe da sauri maye gurbin jikin tanderun gwargwadon kayan aikin zafi daban-daban

1.7 IF ƙarfin lantarki 750V

1.8 DC voltage 500V

1.9 duk-dijital, babu madaidaicin madaidaicin madaidaicin madaidaiciya, yana sa tsarin ya tabbata kuma abin dogaro

1.10 tare da wuce gona da iri, ƙarfin lantarki, matsin lamba, asarar lokaci, matsin lamba na ruwa, zafin ruwa da sauran cikakkiyar kariya, don tabbatar da cewa duk gazawar ba ta lalata kayan aikin wutar lantarki

1.11 layin mai shigowa mai hawa uku baya raba jerin lokaci, ana iya haɗa shi ba da son rai ba

1.12 Sauƙi don amfani “nau’in wawa” nau’in mashaya abu matsakaici mita shigar da wutar makera, ba rashin fahimta

2. Induction heater :

2.1 Induction hita shine tsarin haɗin gwiwa mai saurin canji.

2.2 An yi firikwensin da manyan ƙulli masu ƙulli.

2.3 Dogon jagorar ciki na firikwensin ana kula dashi da gogewa.

2.4 Coil inductor, sandar bas da wayoyi masu haɗawa suna da babban yanki na ƙetare don rage ƙarfin zafi.

2.5 Haɗin ciki na murfin inductor abin dogaro ne, ana kera inductor sosai gwargwadon buƙatun tsari, da babban gwajin kwararar ruwa kafin taro.

2.6 An shigar da canjin zafin jiki akan murfin firikwensin, kuma zai tsaya ta atomatik lokacin da zafin ruwan ya wuce 65 ° C. Lokacin da ba ya aiki, ana iya fitar da condensate a cikin murfin inductor ta iska mai matsawa.

2. Haɗin hanyar ruwa ta 7 mai haɗin sauri ne. Don haɗin abin dogaro da canji mai sauri na haɗin, ana amfani da manyan kusoshin ƙarfe da yawa.

3, Console

Kwamitin nunin yana sanye da nuni na matsakaicin matsakaicin ƙarfin wutar lantarki, iko, DC na yanzu, da madaidaicin ikon sarrafa madaidaiciyar madaidaiciya, ƙarar atomatik ta hannu, ƙarar daidaita wutar lantarki da maɓallin dakatarwar gaggawa, da sauran sarrafa ayyukan da ke da alaƙa da maɓallin maɓallin turawa.

4, bayanin tsarin aikin:

Mai aiki da hannu yana fitar da kayan aikin da ba shi da zafi akan dandalin ajiya. A karkashin aikin silinda, injin turawa yana tura aikin da aka birgima a cikin murhu yana tura tsagi a cikin murhun shigarwa don dumama daidai da lokacin da aka saita. Tsarin sashin tsarin injin yana buƙatar ƙarfi, sassauci, dacewa, da dacewa da aiki da dacewa.