Yadda za a gane ingancin high-mita tanderu inductors

Duba ingancin high-mita tanderu inductors tsari ne mai mahimmanci kuma wajibi. Don haka, akwai abubuwa da yawa waɗanda abokan ciniki ke buƙatar kula da su yayin siyan inductor don manyan murhun wuta:

I) Dubawa da girman girman geometric. An mayar da hankali kan manyan ma’auni na zobe mai tasiri, nisa na diamita, radius fillet, tsayin tsakiya, girman ma’auni na farantin lamba, daidaituwa tsakanin farantin lamba da ƙarshen fuska na zobe mai tasiri, da daidaituwa tare da layin tsakiya na zobe mai tasiri.

2) Weld quality. Lokacin da gwajin matsa lamba ya kai matsi da ake buƙata, ko akwai zubewa. Dole ne a aiwatar da shi daidai da buƙatun zane.

3) Ko kusurwar ramin feshin ya cika buƙatun, da kuma ko an toshe ramin feshin ta hanyar walda.

4) Ko daidaitattun sassan sun cika kuma ko an ƙulla ƙwaya (ana iya sanya maɓalli masu mahimmanci tare da jan fenti idan ya cancanta).

5) Gwajin kwarara. Musamman ga na’urori masu auna firikwensin da ƙananan bututun yanki na giciye, gwajin kwarara yana da matukar mahimmanci.

6) Ko saman allon lamba yana da santsi kuma mai tsabta, kuma ba a yarda da lahani kamar ramuka, bumps, scratches, da dai sauransu. Don madaidaicin madaidaicin lamba, kusurwar mazugi da ƙarancin yanayin da ake buƙata ta zane dole ne a tabbatar da shi, kuma farfajiyar tuntuɓar dole ne ta kasance ba ta da mannewa da suturar fenti.

7) Ragewar radial da axial tsakanin ingantacciyar zobe na nau’in nau’in nau’in zobe na crankshaft firikwensin da aikin aikin dole ne a duba shi tare da ma’auni na musamman da ma’aunin ji.

8) Don inductors na tanderu mai tsayi mai tsayi tare da kayan haɗi da yawa, yi amfani da mita na duniya ko na’urar juriya na 500V don bincika ko sassan gudanarwa kamar zobe mai tasiri suna cikin hulɗa da wasu sassa na ƙarfe.

9) Ko an buga alamomin da ake buƙata akan inductor na tanderun da aka fi girma, kamar girman girman da’irar tasiri ko lambar zane, da dai sauransu.

10) Lokacin da firikwensin yana sanye da haɗin haɗin bututu mai saurin canzawa, ya kamata a daidaita shi da hular bututu, kuma a duba ko ya dace da kyau.

11) Don ƙananan firikwensin dumama rami na ciki, haɗin bututu ta hanyar bututu na tsakiya shine mashigar ruwa, yana da kyau a yi alama don hana haɗin da ba daidai ba lokacin ɗaukar bututun.

12) Bugu da ƙari ga fuskar lamba na firikwensin, ya kamata a fentin fenti mai kariya. Insulating varnish yana daya daga cikin fenti masu dacewa.