Yadda za a yi amfani da high frequency quenching equipment to be safe?

① Ruwan ruwa: da farko fara famfo na ruwa na musamman don kayan aikin kashe wuta mai yawa kuma ku lura ko ruwan ruwa a mashigar yana da al’ada kafin ci gaba zuwa mataki na gaba.

② Kunnawa: Ka tuna da farko ka kunna wuka, sannan ka kunna maɓallin iska a bayan injin, sannan ka kunna wutar lantarki a kan panel ɗin sarrafawa.

③. Saita: Muna zaɓar yanayin aiki (na atomatik, Semi-atomatik, sarrafa hannu da ƙafa) bisa ga buƙatun. Don sarrafa atomatik da Semi-atomatik, kuna buƙatar saita lokacin dumama, riƙe lokaci da lokacin sanyaya (kowane lokaci ba za’a iya saita shi zuwa 0 ba, in ba haka ba ba zai zama al’ada ta atomatik wurare dabam dabam). Kafin amfani da shi a karon farko kuma ba tare da ƙwarewa ba, ya kamata ka zaɓi sarrafa hannu ko ƙafa.

④ Startup: The heating power potentiometer should be adjusted to the minimum as much as possible before starting the high-frequency quenching equipment, and then slowly adjust the temperature to the required power after starting. Press the start button to start the machine. At this time, the heating indicator light on the panel is on, and there will be a sound of normal operation and the work light will flash synchronously.

⑤ Dubawa da auna zafin jiki: Yayin aikin dumama, yawanci muna amfani da duban gani don sanin lokacin da za a dakatar da dumama bisa ga kwarewa. Ma’aikatan da ba su da kwarewa za su iya amfani da ma’aunin zafi da sanyio don gano yanayin zafin aikin.

⑥ Tsaya: Lokacin da zafin jiki ya kai abin da ake buƙata, danna maɓallin tsayawa don dakatar da dumama. Kawai fara sake bayan maye gurbin aikin aikin.

⑦ Rufewa: Kayan aikin kashewa mai ƙarfi na iya aiki gabaɗaya har tsawon sa’o’i 24. Ya kamata a kashe wutar lantarki a lokacin da ba ta aiki, kuma wuka ko na’urar kashe iska bayan injin ya kamata a kashe lokacin da ba ta aiki na dogon lokaci. Lokacin rufewa, dole ne a yanke wutar da farko sannan kuma dole ne a yanke ruwan don sauƙaƙe yaɗuwar zafi a cikin na’ura da zafin na’urar induction.

⑧ Kula da kayan aikin kashe mitoci masu yawa: Lokacin amfani da shi a wuraren da ke da yanayin iska mara kyau, ya kamata a hana ƙura daga shiga cikin na’ura, kuma kada a watsa ruwa a cikin injin. Don kiyaye ruwan sanyi mai tsabta, maye gurbin shi akai-akai. Ci gaba da zazzagewar iska a cikin yanayin zafi mai zafi.

⑨Attention: Try not to work the machine without load, let alone run it without load for a long time, otherwise, it will affect the performance and stability of the machine!