What are the properties of the entire machine for the blank heating furnace of the front axle of the automobile?

1. System power factor: In the case of full voltage, the power factor reaches 0.92;

2. Oxidative decarburization: the heating and oxidation burning loss of the billet is not more than 0.3% of the billet diameter, and the depth of the surface decarburization layer is not more than 0.3mm.

3. Energy consumption: no more than 370kw.h/t under the optimal coupling of load and workpiece;

4. Start-up performance: whether it is hot material, cold material, no load or full load, the start success rate is 100%;

5. Short-circuit protection: When the load is short-circuited, the heating system can be reliably shut down for protection without causing damage to various components;

6. Water temperature protection: The induction coil, intermediate frequency power supply, and capacitor are all equipped with water temperature sensors. When the circulating water temperature exceeds the rated temperature, it can immediately alarm or automatically turn off the intermediate frequency power supply;

7. Safety protection: The whole machine has no leakage of liquid or gas, and the shell should have reliable grounding protection. Protective covers should be provided for places that are prone to safety accidents, and there should be eye-catching safety signs.

8. Buka: manje od 80 db

9. Appearance quality: beautiful appearance, bright spray paint, firm welding, thorough rust removal, smooth and smooth surface, reasonable clearance of each part, clear edges and corners, clear color code, flexible opening of the cabinet door, and beautiful appearance of the whole machine.