Reference and setting method of nnukwu efere muffle temperature and constant temperature time

Many friends are consulting about the reference and setting methods of the temperature and constant temperature time of the muffle furnace. The specific methods are as follows:

If there is no constant temperature timing function:

Click the “Set” button to enter the temperature setting state, the upper row of the display window displays the prompt “SP”, and the lower row displays the temperature setting value (first place value flashes), and you can press the shift, increase, and decrease keys Modify to the required setting value; click the “Set” button again to exit this setting state, and the modified setting value will be automatically saved. In this setting state, if the muffle furnace does not press any key within 1 minute, the controller will automatically return to the normal display state.

If there is a constant temperature timer function

Click the “set” button of the muffle furnace to enter the temperature setting state, the upper row of the display window displays the prompt “SP”, the lower row displays the temperature setting value (first flashing), the modification method is the same as the above; then click ” Set” button to enter the constant temperature time setting state, the upper row of the display window displays the prompt “ST”, and the lower row displays the constant temperature time setting value (first place value flashes); then click the “set” button to exit this Setting status, the modified setting value is automatically saved.

Mgbe etinyere oge okpomoku oge niile ka ọ bụrụ “0”, ọ pụtara na nnukwu ite ọkụ anaghị arụ ọrụ oge, onye njikwa na -agakwa n’ihu, ahịrị nke ala nke windo ngosi na -egosipụta uru setịpụrụ okpomọkụ; mgbe oge edoziri abụghị “0”, ahịrị ala nke windo ngosi ga -egosipụta uru Oge ma ọ bụ ọnọdụ ọnọdụ okpomọkụ. Mgbe egosiri oge ịgba ọsọ, agwa “oge ịgba ọsọ” na -enwu, ma mgbe oke okpomọkụ ruru ogo setịpụrụ, ngụ oge na -amalite usoro iheomume, agwa “oge ịgba ọsọ” na -enwu, oge a gụrụ agụ agwụla, ọrụ ahụ ga -agwụ, na egosiri ihe ngosi a “Ọgwụgwụ” na -egosipụta n’ahịrị dị ala nke mpio ahụ, onye na -eme mkpọtụ ga -ada ụda maka nkeji 1 wee kwụsị ịsụ beepụ. Mgbe ọrụ ahụ gachara, ogologo pịa igodo “ibelata” maka sekọnd 3 ka ịmalitegharịa ọrụ ahụ.

If the muffle furnace temperature setting value is increased during the timing process, the meter will restart timing from 0, and if the temperature setting value is decreased, the meter will continue to keep timing.