Reference and setting method of tungku muffle temperature and constant temperature time

Many friends are consulting about the reference and setting methods of the temperature and constant temperature time of the muffle furnace. The specific methods are as follows:

If there is no constant temperature timing function:

Click the “Set” button to enter the temperature setting state, the upper row of the display window displays the prompt “SP”, and the lower row displays the temperature setting value (first place value flashes), and you can press the shift, increase, and decrease keys Modify to the required setting value; click the “Set” button again to exit this setting state, and the modified setting value will be automatically saved. In this setting state, if the muffle furnace does not press any key within 1 minute, the controller will automatically return to the normal display state.

If there is a constant temperature timer function

Click the “set” button of the muffle furnace to enter the temperature setting state, the upper row of the display window displays the prompt “SP”, the lower row displays the temperature setting value (first flashing), the modification method is the same as the above; then click ” Set” button to enter the constant temperature time setting state, the upper row of the display window displays the prompt “ST”, and the lower row displays the constant temperature time setting value (first place value flashes); then click the “set” button to exit this Setting status, the modified setting value is automatically saved.

Nalika waktos suhu konstan disetél ka “0”, éta hartosna tungku muffle henteu ngagaduhan fungsi waktos, sareng kontributor ngalir teras-terasan, sareng jajaran handap jandéla tampilan méréskeun sét set suhu; nalika waktos anu ditetepkeun sanés “0”, baris handap jandela tampilan mésér ngajalankeun waktos atanapi setting setting suhu. Nalika waktos ngajalankeun ditampilkeun, karakter “waktos ngajalankeun” hurung, sareng nalika suhu anu diukur ngahontal suhu anu diatur, timer mimitian waktuna, karakter “waktos ngajalankeun” hurung, waktos anu diitung parantos réngsé, operasi réngsé, sareng tampilan ditampilkeun “Tungtung” ditampilkeun dina baris handap jandéla, sareng buzzer bakal bip salami 1 menit teras lirén bip. Saatos operasi réngsé, pencét lami tombol “turunkeun” salami 3 detik kanggo ngabalikan operasi.

If the muffle furnace temperature setting value is increased during the timing process, the meter will restart timing from 0, and if the temperature setting value is decreased, the meter will continue to keep timing.