Reference and setting method of firna muffle temperature and constant temperature time

Many friends are consulting about the reference and setting methods of the temperature and constant temperature time of the muffle furnace. The specific methods are as follows:

If there is no constant temperature timing function:

Click the “Set” button to enter the temperature setting state, the upper row of the display window displays the prompt “SP”, and the lower row displays the temperature setting value (first place value flashes), and you can press the shift, increase, and decrease keys Modify to the required setting value; click the “Set” button again to exit this setting state, and the modified setting value will be automatically saved. In this setting state, if the muffle furnace does not press any key within 1 minute, the controller will automatically return to the normal display state.

If there is a constant temperature timer function

Click the “set” button of the muffle furnace to enter the temperature setting state, the upper row of the display window displays the prompt “SP”, the lower row displays the temperature setting value (first flashing), the modification method is the same as the above; then click ” Set” button to enter the constant temperature time setting state, the upper row of the display window displays the prompt “ST”, and the lower row displays the constant temperature time setting value (first place value flashes); then click the “set” button to exit this Setting status, the modified setting value is automatically saved.

Dema ku germahiya domdar li ser “0” tê danîn, ev tê vê wateyê ku firna muffle fonksiyona demjimêriyê tune, û kontrolker bi domdarî dimeşe, û rêza jêrîn a pencereya xuyangê nirxa mîhengê germê destnîşan dike; dema ku dema diyarkirî ne “0” be, rêza jêrîn a pencereya xuyangê nirxa mîhengê Dem an germê nîşan dide. Dema ku dema xebitandinê tê xuyang kirin, karaktera “dema xebitandinê” ronî dibe, û dema ku germahiya pîvandî digihîje germahiya diyarkirî, demjimêr demjimêrê dest pê dike, karakterê “dema xebitandinê” diqulipîne, dema jimartinê xilas dibe, operasyon diqede, û dîmender tê xuyang kirin “End” di rêza jêrîn a pencereyê de tê xuyang kirin, û buzzer dê 1 hûrdemî bipekîne û dûv re bêhnê bide sekinandin. Piştî ku emeliyat xilas bû, pêl bişkoka “kêmkirinê” 3 saniyeyan bikirtînin da ku hûn operasyonê ji nû ve bidin dest pê kirin.

If the muffle furnace temperature setting value is increased during the timing process, the meter will restart timing from 0, and if the temperature setting value is decreased, the meter will continue to keep timing.