ਕਿਸਮਾਂ ਦੀਆਂ ਕਿਸਮਾਂ ਹਨ induction hardening equipment inductors?

The inductor design of the high-frequency hardening equipment adopts the code name T1: Grade 1 copper. The total mass fraction of impurities is 0.05%, tensile strength: 200MPa~400MPa, elongation after fracture: 45%~50%, HBS: 35~40, suitable for various customized inductors for high-frequency quenching.

A. Classification of induction hardening equipment:

1. Simultaneous surface hardening of the bracket pin;

2. Inductor for simultaneous surface hardening of half shafts;

3. Simultaneous surface hardening inductor with water-sealing cover;

4. Inductor for surface hardening of flange parts at the same time;

5. Simultaneous surface hardening of shaft parts;

6. Assemble the half shaft and indicate the quenching inductor at the same time.

B. Crankshaft surface hardening inductor:

1. Split type crankshaft surface quenching inductor; 2. Semicircular crankshaft surface quenching inductor. Crankshaft induction hardening equipment manufacturers can help you solve your problems with crankshaft hardening inductors.

C. Surface hardening sensor for camshafts and cam parts:

1. Surface hardening sensor for camshaft; 2. Surface hardening sensor for automobile shock absorber gear; 3. Surface hardening sensor for brake cam.

D. Inductor for surface hardening of inner hole:

1. Inductor for surface hardening of inner through hole; 2. Inductor for surface hardening of blind hole; 3. Inductor for medium frequency surface hardening of cone hole in spindle.

The inductor used in the inner hole high-frequency hardening equipment may seem simple, but in fact it is not easy. It requires careful and repeated debugging.